1. Fix dust container into place and push until
it clicks into place
2. Slide handle into the top of the vacuum
and push until it clicks into place
3. Insert flexible hose into the opening at the
back of the unit and turn clockwise to lock
into place
4. Loop hose over the hook illustrated
5. Push loose end of hose securely into the
hose inlet
6. Place cord hooks into the rear of the unit
as illustrated. Make sure your top hook
rotates freely and bottom hook points
downwards
7. Store your accessories on the unit as
illustrated
8. Store your turbo pet tool on the front of
the unit by clicking into place
To Next Page
Need help?
General
