Adding/Removing laundry from the machine
If you want to add or remove laundry when your machine is running:
- Switch your machine to the pause mode by pressing on Start/Pause
button.
- After a while, the symbol will be shown on the electronic diplay
and this means that the door of your machine can now be opened.
- When you see the symbol on the electronic display, you can
either add or remove laundry after opening the machine door.
Note: If symbol blinks on the electronic display, it means that you
cannot add or remove laundry as your machine has passed the steps
in question.
- When you have added or removed the laundry, close the door of
your machine and press on Start/Pause button.
- Your machine will continue to wash after locking the door of your
machine.
- The symbol will flash on the electronic display.
29
To Next Page
Loading...
