5. Wash the water tank, the porta-filter, the two crema filters and measuring spoon in a mixture of mild
detergent and water. Rinse each component thoroughly and buff dry with a clean cloth.
6. Before first use, we recommend that you prime the coffee maker and clean out the internal
components of the coffee maker before first use to ensure all manufacturing dust and residues are
removed. NOTE: In order for your appliance to work properly time after time, it must be cleaned
after every use. To prime and clean your coffee maker, please follow the steps below:
a. Place a crema filter into the filter holder of the port-filter. Position the porta-filter
underneath the brew head and attach it to the brew head. Turn the port-filter from left to
right so that it locks into position as illustrated below:
b. Place an empty coffee cup on to the cup holder.
c. When the water tank is already attached to the coffee maker: open the water tank cover
and pour water into the water tank. Note: Never use warm or hot water to fill the water
tank.
Tip: The appliance is supplied with a removable water tank for easy cleaning. You can
remove it from the appliance for ease of filling and place it back onto the appliance.
Ensure that the water level does not exceed the “MAX” level marking on the water tank.
Place the water tank cover back onto the water tank before continuing further.
d. Plug the appliance into a power mains supply.
e. Press the ON/OFF button once. Turn the steam dial towards the back if the indicator light
is not illuminated.
f. Whilst holding a cup beneath the steam wand, turn the steam dial toward yourself. The
pump will start to operate and water will come out.
To Next Page
Loading...
