PRODUCING STEAM TO HEAT LIQUIDS
The steam wand (without the frothing device) can be used to make hot beverages like hot chocolate,
water or tea.
1. Make sure that the steam button is set to the “OFF” or “0” position.
2. Remove the frothing device from the steam wand.
3. Set the steam control dial to the 1st position. Wait until the indicator light is illuminated.
4. Dip the steam wand into the liquid to be heated. Turn the steam control dial in an anti-clockwise
direction to slowly start making steam. Note: Never turn the steam control dial too quickly, as
the steam will accumulate rapidly in a short time which may increase the potential of the risk of
explosion.
5. When the required temperature is reached - turn the steam control dial to the “OFF” or “0” position.
6. Press the OFF button and unplug the machine from the main power source.
CLEANING AND MAINTENANCE
This appliance is for household use only and is not user-serviceable. Do not open or change any
parts by yourself. Please refer to a qualified electrical service department or return to the
supplier if servicing is necessary.
Always remember to unplug the unit from the electrical outlet when not in use and before
cleaning. Ensure that the power button is set to OFF.
Do not use bleach or other abrasive substance or solvents to clean your appliance as it can be
damaging to the finish.
To remove stubborn spots/marks, wipe the surfaces with a cloth slightly dampened in soapy
water or mild non-abrasive cleaner. Dry with a clean, dry, soft cloth.
Don’t immerse the appliance in water or any other liquid.
CLEANING THE BREW HEAD, THE PORTA-FILTER AND FILTER
1. Switch the power button to the OFF position “0” and unplug the power cord from the electrical outlet.
2. Some of the metal parts may still be hot. Do not touch them with your hands until they have cooled.
To Next Page
Loading...
