ALWAYS CLEAN THE FILTER AFTER EACH USE. Failure to do so could cause the safety cut-
out to operate.
- Pull the filter upwards from the appliance.
- Open the filter and remove any threads or fluff by hand or with a soft brush.
- Close the filter and slide it back into place.
- Wash the filter occasionally in detergent solution using a soft brush to remove small
particles.
- If your filter becomes damaged, replace it to ensure no damage is caused to the dryer.
Care and maintenance
For Customer Services & Spare Parts please call 0345 208 8750
Opening times: Monday - Friday 8am – 8pm & Saturday 9am – 1pm
or visit us at www.productcareuk.com
18
Pull to
open
To Next Page
Loading...
