Russell Hobbs RHCM47 - Cappuccino; Latte Macchiato; Milk Froth

11
A beep sounds, the brewing process starts and the chosen button flashes. At the end of the
brewing process, a beep sounds, the control panel is fully lit up again and the machine
automatically switches to stand-by mode.
 The perfect amount of espresso to suit your own taste can be programmed in the machine.
See Programing quantities.
Cappuccino / Latte Macchiato
 Fill the water tank (2) as described above.
 Fill the milk tank (9) as described above.
 Insert the desired filter into the portafilter (12) as described above.
 Fill the filter with coffee powder
 Insert the portafilter into the machine
 Push out the milk nozzle (8) using the lever (7)
 If necessary, select the setting you want using the dial for the milk froth (5). See Setting
the Milk Froth Quantity
 Press the power button (16) to switch on the machine and preheat the water. The control
panel flashes during the heating process.
 Place a suitable cup below the coffee outlet (14) and the milk nozzle.
 As soon as the machine has heated up, the control panel stops flashing. Press the
cappuccino button (23) or the latte macchiato button (19)
A beep sounds, the brewing process starts and the chosen button flashes. At the end of the
brewing process, a beep sounds, the control panel is fully lit up again and the machine
automatically switches to stand-by mode.
 The perfect amount of espresso and milk to suit your own taste can be programed in the
machine. See Programing quantities
Milk Froth
 Fill the water tank (2) as described above.
 Fill the milk tank (9) as described above.
 Push out the milk nozzle (8) using the lever (7)
 Select the setting you want using the dial for the milk froth (5)