Russell Hobbs RHCM47

Questions and Answers:

C
cookemilyAug 14, 2025
Why is my Russell Hobbs RHCM47 control panel not lighting up?
- J
  Jesse CohenAug 14, 2025
  If the control panel of your Russell Hobbs Coffee Maker isn't lighting up and the device won't switch on, there might be a few reasons: * The mains plug might not be correctly inserted. Ensure it's properly plugged in. * The plug socket could be defective. Try using a different socket. * There might be no mains voltage. Check the fuse of the mains connection. * The control panel lighting could be defective, in which case you should contact customer service.
Y
ypatrickAug 17, 2025
What to do if my Russell Hobbs Coffee Maker is beeping and the red light is flashing?
- M
  Matthew ArnoldAug 17, 2025
  If your Russell Hobbs Coffee Maker is beeping constantly, the red indicator light is flashing, and the control panel isn't lighting up, it likely means there's no water in the water tank. To resolve this: 1. Detach the water tank from the device and fill it with water. 2. Place a cup underneath. 3. Press any button. Some water will run through the water system into the cup. The device will stop beeping, the red indicator light goes out and the device can be restarted. 4. Select the function you want again.
V
Victoria NavarroAug 20, 2025
Why does my Russell Hobbs RHCM47 leak water?
- M
  Matthew JonesAug 20, 2025
  If water is leaking from your Russell Hobbs Coffee Maker, it could be due to these reasons: * The water tank might be overfilled. Avoid overfilling it. * The water tank might not be correctly placed. Make sure it's properly fitted in its mount.
G
garciajeanAug 25, 2025
Why is my Russell Hobbs RHCM47 Coffee Maker espresso running so slowly?
- S
  Scott PrestonAug 25, 2025
  If the espresso is running very slowly into the cup with your Russell Hobbs Coffee Maker, it could be because: * The coffee outlet or the filter is clogged. Clean the portafilter and the filter. * The device has lime scale. Descale the device.
J
John WeberAug 27, 2025
How to fix weak espresso from my Russell Hobbs Coffee Maker?
- E
  Elizabeth RosarioAug 27, 2025
  If the espresso from your Russell Hobbs Coffee Maker is too weak, consider the following: * There might not be enough coffee powder in the filter. Ensure you pour the right quantity of coffee powder into the filter. * The set espresso quantity might be too much for the amount of coffee powder. Program the perfect amount of espresso to suit your own taste in the device.
H
harveyrobertAug 31, 2025
Why does my Russell Hobbs RHCM47 Coffee Maker produce so much steam?
- T
  Tom TaylorAug 31, 2025
  A large amount of steam during brewing with your Russell Hobbs Coffee Maker can be caused by: * The device having lime scale. Descale the device. * Selecting cappuccino, latte macchiato, or milk froth without milk in the milk tank. Wait until the program has run through, allow the device to cool, remove and fill the milk tank, then run the program again.
R
Ronald FieldsSep 3, 2025
Why does my Russell Hobbs RHCM47 Coffee Maker smell unpleasant?
- E
  Eric RogersSep 3, 2025
  If you notice an unpleasant smell during use of your Russell Hobbs Coffee Maker: * If it's the first time using the device, a smell often develops initially and should disappear after several uses. * If the device has just been descaled, rinse it out with clean water.
K
Kevin CookeSep 6, 2025
Why is the fuse triggered when I use my Russell Hobbs RHCM47 Coffee Maker?
- A
  Ashley MuellerSep 6, 2025
  If the fuse in the fuse box is triggered when using your Russell Hobbs Coffee Maker, it may be because too many devices are connected to the same circuit. Try reducing the number of devices in the circuit.
K
Kenneth HunterSep 9, 2025
Why is the yellow indicator light flashing on my Russell Hobbs Coffee Maker?
- F
  frankdanielSep 9, 2025
  If the yellow indicator light is flashing on your Russell Hobbs Coffee Maker, it means the device has lime scale. You should descale the device.

Russell Hobbs RHCM47 Specifications

General

Power	900 Watts
Keep Warm Function	Yes
Water Level Indicator	Yes
Anti-Drip Function	Yes
Filter Type	Permanent
Cord Length	0.85 meters
Dimensions	22.5 x 17.5 x 31.5 cm
Weight	1.5 kg