OPERATING INSTRUCTIONS
HOW TO SET THE OVEN CONTROLS
Each time a button is pressed, a beep or alert tone will sound to acknowledge the selection.
SETTING THE DIGITAL CLOCK
With the oven is switched on and ready for input, the LED display will show “0:00” and the alert
tone will ring once. Press the CLOCK/KITCHEN TIMER button once to select the clock
function.
FOR EXAMPLE: Suppose you want to set the clock time to 8:30am.
1. Press CLOCK/ KITCHEN TIMER and the hour figure will begin to flash
2. Turn the control dial to adjust the hour figure to digit 8. Here the input time should be within
0—23 hours.
3. Press CLOCK/ KITCHEN TIMER and the minute figure will begin to flash.
4. Turn the control dial to adjust the minute figure to digit 30. Here the input time should be
within 0—59 minutes.
5. Press CLOCK/ KITCHEN TIMER to confirm the clock setting. Now ":" will flash.
Note:
If the clock is not set then it will not show when the microwave is switched on.
During the process of setting the clock, if you press STOP/CLEAR, the oven will revert
to the previous status automatically and clear your clock selection.
MICROWAVE COOKING
The longest cooking time is 95 minutes.
To cook with microwave power alone, press the MICROWAVE button a number of times to
select the desired cooking power level and then use either the START/ +30SEC/ CONFIRM
button to confirm this selection. Now turn the control dial to set a desired cooking time from
0:05 to 95:00 minutes.
To Next Page
Loading...
