Russell Hobbs RHEM30G

12
Microwave Power Chart:
Display
Microwave Power
P100
100%
P80
80%
P50
50%
P30
30%
P10
10%
For example, suppose you want to cook for 20 minutes at 80% of microwave power.
1. Press the MICROWAVE button once and "P100" will show on the LED display.
2. Press MICROWAVE one more time or turn the control dial to select 80% microwave power.
3. Press either the START/ +30SEC/ CONFIRM button to confirm this selection.
4. Now turn the control dial to adjust the cooking time to 20:00 minutes. (The time setting
should be between 0:05- 95:00.)
5. Press START/ +30SEC/ CONFIRM to start cooking.
NOTE: the step quantities for the adjustment time of the coding switch are as follows:
0---1 min : 5 seconds
1---5 min : 10 seconds
5---10 min : 30 seconds
10---30 min : 1 minute
30---95 min : 5 minutes
GRILL OR COMBI COOKING
To use the grill and cook combination, press the GRILL/ COMBI button once. The LED will
display “G”. Press GRILL/ COMBI a number of times to select the desired power level. It will
show either “G” , “C-1” or “C-2” each time you press GRILL/ COMBI. Then press START/
+30SEC/ CONFIRM to confirm your power level selection. Now turn the control dial to set a
desired cooking time from 0:05 to 95:00 minutes. Press START/ +30SEC/ CONFIRM again to
start cooking.