EasyManua.ls Logo

Russell Hobbs RHFD01

Russell Hobbs RHFD01
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
water reservoir/ water tank. CAUTION: Do not overfill the water reservoir/ water tank! Do not fill it
above the MAX level mark.
2. Put the filter in the filter holder but don’t add any ground coffee. Then, close the water tank lid.
3. Place the carafe on the drip plate.
4. Connect to the power source, 12:00 will show on the display.
5. Press the ON/OFF button once, it will illuminate in red and water will start dripping automatically
after a while.
6. The appliance will shut off automatically after 35 minutes when the brewing is finished.
7. Press the ON/OFF button twice to switch the machine off.
6. Once the water has stopped dripping, you can empty the carafe and clean it thoroughly. Now you
may start brewing coffee.
MAKING FILTER COFFEE
1. Open the water tank cover and fill the tank with cold water following the level indicators on the
tank. Water should not exceed the maximum level.
2. Fill the removable permanent filter with ground coffee. Usually one cup of coffee needs a level
spoon of ground coffee, but it may be adjusted according to your specific requirements.
Gently shake the removable permanent filter to distribute the coffee evenly.
3. Now insert the filter holder and removable permanent filter back into the machine. Ensure that
they are properly attached and seated.
4. Close the water reservoir/ water tank lid.
5. Place the glass carafe onto the cup warming plate.
6. Press the ON/OFF button once, the button will illuminate red, and coffee will start brewing
automatically.
NOTE: Your appliance includes a Drip-Stop/ Anti-Drip feature. The drip-stop activates when
removing the glass carafe from the cup warming plate. This feature prevents the coffee from
dripping onto the cup warming plate if there is still water in the filter.
If there is still water in the water reservoir/ water tank, place the glass carafe back onto the cup
warming plate as soon as possible to ensure that the filter does not overflow. We recommend
that you do not have the glass carafe removed from the cup warming plate for longer than 30
(thirty) seconds.

Related product manuals