17
Cleaning and Maintenance:
Important notes:
• The appliance will become hot during operation, especially near the bulbs.
Allow the appliance to cool down before cleaning.
• Penetrating moisture may result in an electric shock. Clean the appliance using
a damp cloth only. Before cleaning, pull out the mains plug or switch off the
circuit breaker in the fuse box.
• Do not use any high-pressure cleaners or steam cleaners, which can result in an
electric shock.
• Components inside the appliance may have sharp edges. Wear protective
gloves.
How to clean
Observe the information in the table on the following page to ensure that the
different surfaces are not damaged by using the wrong type of cleaning agent. Do
not use:
• Harsh or abrasive cleaning agents,
• Cleaning agents with a high concentration of alcohol,
• Hard scouring pads or sponges,
• High-pressure cleaners or steam cleaners.
Wash new sponge cloths thoroughly before use.
Follow all instructions and warnings included with the cleaning agents.
To Next Page
Loading...
Need help?
General
