Name: Russell Hobbs RHGWC1B-C
Brand: Russell Hobbs
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Lock & Keys (selected models)

• Some models are provided with a lock and 2 keys. The lock will be on

the front of the unit/door at the bottom. The keys are packaged with

the instruction manual inside the appliance.

• To lock the appliance insert 1 of the keys into the lock and turn it

clockwise until the metal pin is fully engaged and the door is locked.

Remove the key and place it in a secure place.

• To unlock the appliance insert 1 of the keys in to the lock and turn the

key counter clockwise until the metal pin is fully released and the door

is unlocked. Remove the key and place it in a secure place.

• If required the locking plate at the bottom of the unit (this is where the

locking pin locates when the unit is locked) can be adjusted. To do this

loosen the 2 screws, adjust the plate and retighten the screws. Check

the locking pin locates correctly.

Door Reversal

You will need to tilt the cooler backward to access the lower hinge which

holds screws. Do not tilt more than 45 degrees and do not lay the cooler flat

on its side.

Tools Required: Philip head screwdriver, flat headed screwdriver and

hexagonal spanner.

1. Remove the top plastic hinge cover and set aside, then unscrew the 4

screws from the metal bracket and set aside. Carefully remove the door

and place it on a cushioned surface.

r6.2

For Customer Services, Spare Parts & Warranty Information please call 0845 209 7461

- 10 -

Questions and Answers:

Need help?

Do you have a question about the Russell Hobbs RHGWC1B-C and is the answer not in the manual?

Russell Hobbs RHGWC1B-C Specifications

General