To Next PageTo Next PageWhat to do if my Russell Hobbs RHWM612-M does not start?
If your Russell Hobbs Washer doesn't start, make sure it's properly plugged in and the fuse hasn't blown. Also, check that there is electricity. Ensure you've pressed the Start/Pause button and the program dial is set to the desired position, not 'stop'. Finally, confirm that the machine door is completely closed.
Why is my Russell Hobbs Washer not discharging water?
If your Russell Hobbs Washer isn't discharging water, the outlet hose might be clogged or twisted, so check and clean or untwist it. Another possible cause is a clogged pump filter, which you should clean. Also, laundry settled unevenly in the machine can cause this problem; spread your laundry evenly.
How to stop my Russell Hobbs RHWM612-M Washer from vibrating?
If your Russell Hobbs Washer vibrates, it could be due to several reasons. First, make sure the feet of your machine are adjusted correctly. Second, check that the transportation screws have been removed. Vibration can also occur if the machine is under-loaded or overloaded with laundry, or if the laundry settled unevenly. Prevent your machine from resting on hard surfaces.
General| Type | Freestanding |
|---|---|
| Load Capacity | 6 kg |
| Spin Speed | 1200 rpm |
| Energy Rating | A+ |
| Weight | 60 kg |
| Colour | White |
| Number of Programs | 15 |
| Color | White |
Essential safety advice for operating the washing machine, covering electrical hazards and child safety.
Instructions for removing transport screws before the first use to prevent damage and malfunction.
Detailed steps for removing transport screws and rubber spacers from the machine's rear.
Instructions for connecting the appliance to a suitable earthed power supply.
Step-by-step guide for connecting the water inlet hose to the tap and machine.
Lists common error codes and their corresponding troubleshooting steps and solutions.
Provides solutions for common washing machine faults like no water or not starting.
