EasyManua.ls Logo

Russell Hobbs RHWM712 - Drain Filter Cleaning

Russell Hobbs RHWM712
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm
or visit us at www.productcareuk.com
26
Maintenance
Cleaning the drain filter
This drain filter is used to screen foreign objects such as threads, coins, pins,
buttons etc.
If the drain filter is not cleaned regularly (after every 10 times of use), a
drain problem could be caused.
CAUTION
Be careful when draining, the water could be hot.
Please Note: Unplug the appliance before cleaning the filter for your
own safety .
Remove toe board.
Before opening the filter cover, place a towel on the ground immediately
in front of the
filter hole to soak up remaining water.
Loosen the filter cover and allow water to flow out.
Clean the foreign objects present in the filter.
After cleaning the filter, fit the filter cover by rotating it clockwise.
Replace the toe board.
Remember that water will leak if you do not fit the filter cover properly.

Related product manuals