Russell Hobbs RHWU88 - User Manual

Other manuals for Russell Hobbs RHWU88

Faq3 pages

Need help?

Do you have a question about the Russell Hobbs RHWU88 and is the answer not in the manual?

Summary

Water Urn RHWU88 INSTRUCTIONS & WARRANTY

Warranty Against Defects

Definitions

Defines terms like Australian Consumer Law, CGA, Goods, Manufacturer, Supplier, and You.

Warranty Period Details

Specifies warranty durations for Russell Hobbs products and motors.

Warranty Conditions

Usage and Limitations

Covers proper use, misuse, abuse, accident, and non-observance of instructions.

Warranty Voidance and Exclusions

Details conditions that void the warranty, such as tampering or unauthorized repairs.

Appliance Components

Parts Identification Diagram

Identifies and labels all key parts of the water urn with numbered references.

Operating Your Urn

Before First Use Procedures

Steps for initial cleaning, setup, and basic operation before regular use.

How to Use the Water Urn

Instructions for filling, heating water, and dispensing hot water using the tap.

Boil-Dry Protection and Maintenance

Boil-Dry Protection Reset

Explains the boil-dry safety feature and the manual reset procedure.

Care and Maintenance Guide

Provides instructions for cleaning the urn and its components.

Regular Descaling Procedure

Outlines the steps for descaling the urn to maintain performance.

Important Safeguards

Electrical and Usage Safety

Crucial safety precautions for electrical hazards, usage, and handling.

This document describes the Russell Hobbs RHWU88 Water Urn, an electrical appliance designed for heating water.

Function Description:

The Russell Hobbs RHWU88 Water Urn is a household appliance primarily used for heating water. It features a heating element to bring water to a desired temperature and a tap for dispensing hot water. The urn is equipped with safety features such as boil-dry protection and a thermal limiter to ensure safe operation. It is intended for domestic use, with a limited 90-day warranty for industrial or commercial applications.

Important Technical Specifications:

Model: RHWU88
Power: The appliance connects to a standard wall power outlet. Specific wattage or voltage details are not provided in the manual but it states the Goods must be connected to the electrical voltage requirements as specified in the ratings label located on the Goods.
Capacity: The water gauge indicates a 'MAX' line for filling, and a 10-cup mark is mentioned for descaling purposes, suggesting a capacity of at least 10 cups.
Warranty: Two (2) years for Russell Hobbs products, covering defective workmanship or materials from the date of purchase.

Usage Features:

Controls: The urn has an On/Off switch, a reset button, a heating light, and a hot light.
Water Gauge: A clear water gauge on the side of the urn allows users to monitor the water level.
Lid: The lid is designed to be turned anti-clockwise to disengage and clockwise to lock into place, ensuring it is securely fastened during operation.
Cool-Touch Handles: The urn is equipped with cool-touch handles for safe handling.
Water Tap: A water tap with a lever mechanism allows for easy dispensing of hot water. Pressing down on the lever dispenses water, and lifting it stops the flow.
Indicator Lights:
- Heating Light: Illuminates when the water is actively heating.
- Hot Light: Illuminates when the water has reached the desired temperature. The lights will toggle between "Hot" and "Heating" as the thermostat cycles to maintain temperature.
Boil-Dry Protection: The urn is protected by a thermal limiter that automatically switches off the heating element if the urn boils dry. This feature can be manually reset using a button located under the base of the urn after the appliance has cooled down.
First Use Preparation: Before the first use, it is recommended to fill the urn to the 'MAX' level, boil the water, discard it, and rinse several times to remove any manufacturing residues.
Safety Precautions:
- Always place the urn on a dry, stable, level, and heat-resistant surface.
- Ensure the lid is locked in place when in use.
- Do not move the urn when it is in operation or hot.
- Use caution when pouring water, as boiling water can scald.
- Be aware of steam escaping from the steam holes on top of the urn during use.
- Do not immerse the power cord, plug, or urn in water or any other liquid.
- Do not use in the bathroom, near any water source, or outdoors.
- Avoid touching the lid or body of the urn when it is hot.
- Keep the urn and power cord away from the edge of tables/countertops and out of reach of children or infirm persons.
- Do not fill past the 'MAX' line.
- Do not leave the product unattended when in use.
- The appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities unless supervised or instructed.
- Not intended to be operated by an external timer or separate remote control system.

Maintenance Features:

Cleaning:
- Always switch off, unplug, and allow the urn to cool completely before cleaning.
- Wipe the outside of the urn with a damp cloth, using a mild dishwashing detergent if needed.
- Ensure the power cord and switches remain dry.
- Do not immerse the urn in liquid.
- Do not use harsh or abrasive cleaning agents or solvents.
Descaling:
- Regular descaling is recommended every three months, or more frequently in hard water areas, to maintain performance.
- The descaling process involves filling the urn with water to the 10-cup mark, adding 4 to 5 teaspoons of citric acid or a proprietary descaling product, heating the water until the 'Hot' light illuminates, leaving it on for an additional 15 minutes, then switching it off, allowing it to cool, draining the water through the tap, and finally rinsing the urn with fresh water to remove any residue.
Troubleshooting Boil-Dry Protection: If the urn boils dry and the thermal limiter activates, the lights will remain off. To reset, unplug the urn, allow it to cool, press the reset button under the base, add water, plug it back in, and switch it on. If the "Heating" light does not come on, repeat the process. If the issue persists, contact customer service.