Need help?Do you have a question about the Rx Clear HydroSalt 3753040 and is the answer not in the manual?
Details electrical safety, grounding, bonding, and wiring compliance for installation.
Covers restrictions on child usage, safety during plumbing operations, and material compatibility.
Ensures generator runs with pump, discusses supplemental chlorine, and emphasizes pool chemistry.
Explains the salt water chlorination process and specifies the system's capacity for residential pools.
Lists factors influencing the required amount of chlorination for a pool.
Details the AUTO, SUPER CHLOR, and OFF modes of the control switches.
Instructions on how to adjust the chlorine output level percentage.
Stresses the necessity of proper water chemistry and presents ideal chemical level ranges.
Defines the saturation index and provides the formula for its calculation.
Guides on how to calculate pool size in gallons and liters for salt determination.
Specifies recommended salt types and provides instructions for adding salt to the pool.
Table showing approximate pounds (kg) of salt needed for ideal salinity levels.
Table detailing pounds (kg) of stabilizer needed for 80 PPM.
Introduces the system's indicator lights and diagnostic display features.
Explains the status and meaning of various indicator lights like GENERATION, HIGH SALT, etc.
Details the information shown on the diagnostic display, such as salt level and temperature.
Step-by-step guide on how to recalibrate the system, including button presses and dial adjustments.
Guidance on initial startup after long periods and regular monitoring during use.
Information on when and how to clean the cell, including notification indicators.
Detailed steps for cleaning the cell with mineral deposits using a specific solution.
Critical safety warnings regarding acid handling, mixing, and personal protective equipment.
Ensures correct water chemistry and careful measurement before starting installation.
Instructions on placement, safety clearances, and mounting methods for the control box.
Guidance on correctly orienting the flow switch and connecting cell/flow switch cables.
Advice on pipe sizes, reducer bushings, and general plumbing considerations.
Highlights qualifications for service and details voltage setting via jumper configuration.
Diagrams illustrating different system installation configurations and orientations.
Troubleshooting steps for when the unit shows no reaction or display.
Diagnosing and resolving issues related to the "NO FLOW" indicator light.
Explains common error codes indicated by flashing or blinking lights (e.g., Inspect Cell, Check Salt).
Addresses common causes and solutions for insufficient chlorine levels in the pool.
Outlines the warranty period, coverage, and specific exclusions for the system.
Details purchaser responsibilities for shipping and explains warranty remedies and state rights.
General| Brand | Rx Clear |
|---|---|
| Model | HydroSalt 3753040 |
| Category | Water Filtration Systems |
| Language | English |
To Next Page
