14
Jr.
Sodcutter
HANDLE SUPPORT SPRING
This spring S helps support the handle. If the four (4)
isolator handle mounts are sagging or distorted, the two
locking adjustment nuts T can be tighted downward to
increase the spring force and raise the handle.
HANDLE STOP BOLTS
These two bolts Y limit the amount of handle movement.
This prevents damage to the handle isolators, and provides
positive control of the machine when extra effort is required
to lift or turn. The rear stop bolt position is adjustable..
Loosen the two bolts X on the bolt centering plates on each
side and tighten with the stop bolts centered in the two
handle holes Z.
ADJUSTMENTS
To Next Page
Loading...
