Ryobi CG180SPK User Manual

OWNER’S OPERATING MANUAL
GRINDER SANDER POLISHER
MODEL CG180SPK
IMPORTANT NOTICE:
This Grinder Sander Polisher is designed for light consumer use. It is NOT
designed for trade or industrial use and is not covered by warranty for use in
these applications.
THANKYOU FOR BUYING A RYOBI GRINDER SANDER POLISHER
Your new Grinder Sander Polisher has been engineered and manufactured to Ryobi's high standard for
dependability, ease of operation and operator safety. Properly cared for, it will give you years of rugged,
trouble free performance.
CAUTION: Carefully read through this entire owner's manual before using your grinder
sander polisher.
Pay close attention to the Rules for Safe Operation, Warnings and Cautions. If you use your saw properly and
only for what it is intended, you will enjoy years of safe, reliable service.
Thank you again for buying Ryobi tools.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
SPECIFICATIONS:
• Power Input.............................................. 1500 watts
• No Load Speed ........................................ 1500 - 6500 r.p.m.
• Disc Bore Size Grinding Wheel .............. 22mm
• Disc Bore Size Sanding Pad .................. 16mm
• Spindle Thread ........................................ M13 x 2.0mm
• Weight (Machine Only) .......................... 3.9kg
STANDARD ACCESSORIES:
• Carry Case
• 180mm Grinding Wheel
• 180mm Sanding Pad
• Synthetic Wool Bonnet
• Wrench
• Hex Wrench

Ryobi CG180SPK Specifications

General

Power Source	Cordless
Voltage	18V
Dust Collection	Yes
No Load Speed	10, 000 OPM
Sanding Motion	Random Orbit

Summary

Rules for Safe Operation

Safety Alert Symbol

Indicates caution or warning. May be used in conjunction with other symbols or pictures.

Double Insulation

Concept eliminating need for earth grounding, using two sets of insulation for user protection.

Switch Operation

Starting Switch

Starts and stops the tool by depressing and releasing the switch. Continuous operation requires pressing the lock button.

Electronic Speed Control

Table 1: Speed Settings

Provides recommended R.P.M. and speed settings for Polishing, Sanding, and Grinding applications.

Maintenance

General Maintenance

Check tool after use. Clean accumulated dust. Replace worn carbon brushes to maintain performance.

Home Use Warranty

24 Months Home Use Warranty

Warrants tool free from defects in material/workmanship for 24 months for home use.

Warranty Conditions

Applies if product used per recommendations. Excludes damage from misuse, neglect, abuse, or unauthorized modifications.

30 Day Satisfaction Guarantee

Allows refund or exchange within 30 days of purchase if not completely satisfied with product performance.