Ryobi DP120 User Manual

1
THANK YOU FOR BUYING A RYOBI BENCHTOP DRILL PRESS.
Your new Drill Press has been engineered and manufactured to Ryobi's high standards for dependability, ease of operation,
and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
CAUTION: Carefully read through this entire operator's manual before using your new machine.
Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. If you use your machine properly and only for
what it is intended, you will enjoy years of safe, reliable service.
Please fill out and return the Warranty Registration Card so we can be of future service to you.
Thank you again for buying Ryobi tools.
OPERATOR’S MANUAL
12 in. (305 mm) DRILL PRESS
MODEL DP120
SAVE THIS MANUAL FOR FUTURE REFERENCE
1
2
D
r
l
l
i
P
r
e
s
s
ON

Ryobi DP120 Specifications

General

Type	Drill Press
Number of Speed Settings	5
Motor Power	0.5 HP
Chuck Size	1/2 inch
Swing	10 inches
Spindle Travel	50mm

Summary

PRODUCT SPECIFICATIONS

Detailed Technical Specifications

Detailed technical specifications for the drill press, including chuck size, speed, and weight.

SAFETY AND INTERNATIONAL SYMBOLS

Explanation of Safety Symbols

RULES FOR SAFE OPERATION

General Safety Precautions

Comprehensive list of general safety precautions to follow during operation.

SPECIFIC SAFETY RULES FOR DRILL PRESSES

Drill Press Specific Safety Rules

Tailored safety rules specific to operating drill presses to prevent accidents.

SAFETY SYMBOL DEFINITIONS AND SERVICE INFO

Safety Symbol Definitions

Explanation of safety symbols, danger, warning, and caution indicators.

ELECTRICAL CONNECTION AND USE

FEATURES OF THE RYOBI DRILL PRESS

ASSEMBLY INSTRUCTIONS

Attaching Column Assembly

Step-by-step guide to attaching the column support to the drill press base.

Installing the Idler Pulley

Table and Handle Assembly

Instructions for assembling the worktable and its adjustment handle.

Mounting Drill Press to Workbench

Methods for securely mounting the drill press to a workbench for stability.

Head Assembly Installation

Guidance on mounting the head assembly and attaching feed handles.

Clamping Drill Press to Workbench

ADJUSTMENTS

Adjusting Table Height

How to raise or lower the drill press worktable to the desired position.

Changing Spindle Speeds

Bevel Adjustment

Depth Stop Adjustment

OPERATION

Locking the Switch

Installing Drill Bits

Self-Ejecting Chuck Key

Drilling Procedure

Step-by-step guide on how to perform drilling operations safely and effectively.

MAINTENANCE

TROUBLESHOOTING GUIDE

Problem Resolution Guide

Common problems, their possible causes, and solutions for the drill press.

SERVICE AND INFORMATION

Service Contact Information