3
English
GB
FR DE ES IT NL PT DK SE FI NO RU PL CZ HU RO LV LT EE HR SI SK GR TR
tool.
p. Grip the tool securely with both hands while
operating.
SYMBOL
Safety Alert
V Volts
Hz Hertz
Alternating Current
W Watts
n
º
No-load speed
n Rated speed
min¹ Revolutions or reciprocations per minute
CE Conformity
Double insulation
Wear ear protection
Wear eye protection
Please read the instructions carefully before
starting the machine.
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
Local Authority or retailer for recycling advice.
Recycle raw materials instead of disposing
of as waste. The machine, accessories and
packaging should be sorted for environmental-
friendly recycling.
SPECIFICATIONS
Grinding wheel 230 mm (9 in)
Frequency 50 Hz
Voltage 230 V - 240 V
Input 2000 W
Spindle thread M14
Rated speed 6000 min¹
Overall length 470 mm
Net weight 6.0 kg
NOTE: Be sure to check the nameplate on the product,
because the voltage is subject to change depending on
the area in which the product is to be used.
Maximum circumferential speed of grinding wheel: 4,800
m/min.
Example of calculation
3.14 x 230 x 6,000/1,000 = 4,333.2
3.14 x 180 x 6,000/1,000 = 3,391.2
Circumferential speed of
grinding wheel
4,333.2/3,391.2
Wheel diameter 230/180
Rated speed of grinder 6,000
STANDARD ACCESSORIES
Auxiliary handle
A grinding wheel is included in the standard accessories
for some countries.
OPERATION
See gure 4.
WARNING
Keep safety guards in place. Never cover the air vents
since they must always be open for proper motor
cooling.
The key to ef cient operating is controlling the pressure
and surface contact between the disc and workpiece. Flat
surfaces are ground at an acute angle, usually 10 to 20
degrees with the workpiece. Allow the disc to reach full
speed before starting to grind. Too great an angle causes
concentration of pressure on a small area which may
gouge or burn work surface.
SWITCH
See gure 2.
To switch on the unit, press forward the safety lock
and then press the on/off switch.
To switch off the unit, release the on/off switch.
To Next Page
Loading...
Need help?
General
