Ryobi EJ500 - Page 118

GB
DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product is in
conformity with the following standards or standardized documents:
2006/42/EC, 2006/95/EC, 2004/108/EC, EN55014-1, EN55014-2,
EN61000-3-2, EN61000-3-3, EN60745-1, EN60745-2-11, EN62233.
Noise level [K=3dB(A)]: Lp=90.8dB(A) Lw=101.8dB(A)
Vibration level: Cutting wood [K=2.5m/s²] ah=10.7m/s², Cutting metal
sheet [K=1.5m/s²] ah=11.9m/s²
FR
DÉCLARATION DE CONFORMITÉ
Nous déclarons sous notre propre responsabilité que ce produit est en
conformité avec les normes ou documents normalisés suivants:
2006/42/EC, 2006/95/EC, 2004/108/EC, EN55014-1, EN55014-2,
EN61000-3-2, EN61000-3-3, EN60745-1, EN60745-2-11, EN62233.
Niveau de bruit [K=3dB(A)]: Lp=90.8dB(A) Lw=101.8dB(A)
Niveau de vibration: Coupe dans le bois [K=2.5m/s²] ah=10.7m/s²,
Coupe dans de la tôle métallique [K=1.5m/s²] ah=11.9m/s²
DE
KONFORMITÄTSERKLÄRUNG
Wir erklären in alleiniger Verantwortung, dass dieses Produkt mit den
folgenden Normen oder normativen Dokumenten über-einstimmt:
2006/42/EC, 2006/95/EC, 2004/108/EC, EN55014-1, EN55014-2,
EN61000-3-2, EN61000-3-3, EN60745-1, EN60745-2-11, EN62233.
Geräuschpegel [K=3dB(A)]: Lp=90.8dB(A) Lw=101.8dB(A)
Vibrationsgrad: Holzschneiden [K=2.5m/s²] ah=10.7m/s²,
Blechschneiden [K=1.5m/s²] ah=11.9m/s²
ES
DECLARACIÓN DE CONFORMIDAD
Declaramos bajo nuestra exclusiva responsabilidad que este producto
es conforme a las siguientes normas o documentos normalizados:
2006/42/EC, 2006/95/EC, 2004/108/EC, EN55014-1, EN55014-2,
EN61000-3-2, EN61000-3-3, EN60745-1, EN60745-2-11, EN62233.
Nivel de ruido [K=3dB(A)]: Lp=90.8dB(A) Lw=101.8dB(A)
Nivel de vibración: Cortar madera [K=2.5m/s²] ah=10.7m/s², Cortar
lámina de metal [K=1.5m/s²] ah=11.9m/s²
IT
DICHIARAZIONE DI CONFORMITÀ
Dichiariamo, assumendo la piena responsabilità di tale dichiarazione,
che il prodotto è conforme alle seguenti normative e ai relativi
documenti:
2006/42/EC, 2006/95/EC, 2004/108/EC, EN55014-1, EN55014-2,
EN61000-3-2, EN61000-3-3, EN60745-1, EN60745-2-11, EN62233.
Livello di rumore [K=3dB(A)]: Lp=90.8dB(A) Lw=101.8dB(A)
Livello di vibrazioni: Taglio del legno [K=2.5m/s²] ah=10.7m/s², Taglio
dei fogli di metallo [K=1.5m/s²] ah=11.9m/s²
NL
CONFORMITEITSVERKLARING
Wij verklaren op onze eigen verantwoordelijkheid dat dit product
voldoet aan de volgende normen of normatieve documenten.
2006/42/EC, 2006/95/EC, 2004/108/EC, EN55014-1, EN55014-2,
EN61000-3-2, EN61000-3-3, EN60745-1, EN60745-2-11, EN62233.
Geluidsniveau [K=3dB(A)]: Lp=90.8dB(A) Lw=101.8dB(A)
Trillingsniveau: Zagen van hout [K=2.5m/s²] ah=10.7m/s², Zagen van
plaatmetaal [K=1.5m/s²] ah=11.9m/s²
PT
DECLARAÇÃO DE CONFORMIDADE
Declaramos, sob nossa exclusiva responsabilidade, que este produto
cumpre as seguintes normas ou documentos normativos.
2006/42/EC, 2006/95/EC, 2004/108/EC, EN55014-1, EN55014-2,
EN61000-3-2, EN61000-3-3, EN60745-1, EN60745-2-11, EN62233.
Nível de ruído [K=3dB(A)]: Lp=90.8dB(A) Lw=101.8dB(A)
Nível de vibração: No corte de madeira [K=2.5m/s²] ah=10.7m/s², No
corte de chapa de metal [K=1.5m/s²] ah=11.9m/s²
DK
KONFORMITETSERKLÆRING
Vi erklærer på eget ansvar, at dette produkt er i overensstemmelse
med følgende standarder eller standardiseringsdokumenter:
2006/42/EC, 2006/95/EC, 2004/108/EC, EN55014-1, EN55014-2,
EN61000-3-2, EN61000-3-3, EN60745-1, EN60745-2-11, EN62233.
Støjniveau [K=3dB(A)]: Lp=90.8dB(A) Lw=101.8dB(A)
Vibrationsniveau: Træskæring [K=2.5m/s²] ah=10.7m/s²,
Metalpladeskæring [K=1.5m/s²] ah=11.9m/s²
SE
FÖRSÄKRAN
Vi intygar och ansvarar för, att denna produkt överensstämmer med
följande normer och dokument.
2006/42/EC, 2006/95/EC, 2004/108/EC, EN55014-1, EN55014-2,
EN61000-3-2, EN61000-3-3, EN60745-1, EN60745-2-11, EN62233.
Bullernivå [K=3dB(A)]: Lp=90.8dB(A) Lw=101.8dB(A)
Vibrationsnivå: Sågning i trä [K=2.5m/s²] ah=10.7m/s², Sågning i
metallplåt [K=1.5m/s²] ah=11.9m/s²
FI
TODISTUS STANDARDIN-MUKAISUUDESTA
Todistamme täten ja vastaamme yksin siitä, että tämä tuote on alla
lueteltujen standardien ja standardoimis-asiakirjojen vaatimusten
mukainen.
2006/42/EC, 2006/95/EC, 2004/108/EC, EN55014-1, EN55014-2,
EN61000-3-2, EN61000-3-3, EN60745-1, EN60745-2-11, EN62233.
Melutaso [K=3dB(A)] : Lp=90.8dB(A) Lw=101.8dB(A)
Tärinätaso: Puun leikkaus [K=2.5m/s²] ah=10.7m/s², Metallilevyn
leikkaus [K=1.5m/s²] ah=11.9m/s²
NO
SAMSVARSERKLÆRING
Vi erklærer på eget ansvar at dette produktet er i samsvar med
følgende standarder og normative dokumenter:
2006/42/EC, 2006/95/EC, 2004/108/EC, EN55014-1, EN55014-2,
EN61000-3-2, EN61000-3-3, EN60745-1, EN60745-2-11, EN62233.
Støynivå [K=3dB(A)]: Lp=90.8dB(A) Lw=101.8dB(A)
Vibrasjonsnivå: Skjæring av tre [K=2.5m/s²] ah=10.7m/s², Skjæring
av metallplater [K=1.5m/s²] ah=11.9m/s²
RU
   
    ,  
      :
2006/42/EC, 2006/95/EC, 2004/108/EC, EN55014-1, EN55014-2,
EN61000-3-2, EN61000-3-3, EN60745-1, EN60745-2-11, EN62233.
  [K=3dB(A)]: Lp=90.8dB(A) Lw=101.8dB(A)
 :    [K=2.5m/s²] ah=10.7m/
s²,     [K=1.5m/s²] ah=11.9m/s²
PL
DEKLARACJA ZGODNOCI
Z ca odpowiedzialnoci owiadczamy, e niniejszy produkt
jest zgodny z normami czy te znormalizowanymi dokumentami
wymienionymi poniej:
2006/42/EC, 2006/95/EC, 2004/108/EC, EN55014-1, EN55014-2,
EN61000-3-2, EN61000-3-3, EN60745-1, EN60745-2-11, EN62233.
Poziom haasu [K=3dB(A)]: Lp=90.8dB(A) Lw=101.8dB(A)
Poziom drga: Cicie drewna [K=2.5m/s²] ah=10.7m/s², Cicie blach
stalowych [K=1.5m/s²] ah=11.9m/s²
CZ
PROHLÁŠENÍ O SHOD
Prohlašujeme na svou zodpovdnost, že tento výrobek spluje
požadavky níže uvedených norem a závazných pedpis:
2006/42/EC, 2006/95/EC, 2004/108/EC, EN55014-1, EN55014-2,
EN61000-3-2, EN61000-3-3, EN60745-1, EN60745-2-11, EN62233.
Hladina hluku [K=3dB(A)]: Lp=90.8dB(A) Lw=101.8dB(A)
Úrove vibrací: ezání deva [K=2.5m/s²] ah=10.7m/s², ezání
kovového plechu [K=1.5m/s²] ah=11.9m/s²
HU
SZABVÁNY RENDELKEZÉSEK
Felelsségünk teljes tudatában kijelentjük, hogy a jelen termék
megfelel a következ szabványoknak és elírásoknak:
2006/42/EC, 2006/95/EC, 2004/108/EC, EN55014-1, EN55014-2,
EN61000-3-2, EN61000-3-3, EN60745-1, EN60745-2-11, EN62233.
Zajszint [K=3dB(A)]: Lp=90.8dB(A) Lw=101.8dB(A)
Vibráció szint: Fa vágása [K=2.5m/s²] ah=10.7m/s², Fémlemez
vágása [K=1.5m/s²] ah=11.9m/s²
RO
DECLARAIE DE CONFORMITATE
Declarm pe propria rspundere c acest produs este conform cu
normele sau documentele normative urmtoare:
2006/42/EC, 2006/95/EC, 2004/108/EC, EN55014-1, EN55014-2,
EN61000-3-2, EN61000-3-3, EN60745-1, EN60745-2-11, EN62233.
Nivelul de zgomot [K=3dB(A)]: Lp=90.8dB(A) Lw=101.8dB(A)
Nivelul vibraiilor: Tiere lemn [K=2.5m/s²] ah=10.7m/s², Tiere plac
metalic [K=1.5m/s²] ah=11.9m/s²