4
THANK YOU FOR BUYING A RYOBI PRODUCT.
To ensure your safety and satisfaction, carefully read this
OWNER’S MANUAL
and the SAFETY INSTRUCTIONS
before using this product.
DESCRIPTION
1. Trigger switch
2. Low guard lock lever
3. Bench
4. Fence
5. Arbor
Bolt
6. Bevel cut adjuster
7. Lower guard
8. Saw head lock bolt
9. Flange
10. Dust port
11. Bolt holes for attachment to base
12. Saw head
13. Livetool Indicator
14. Handle
15. Spanner
16. Sleeve Wrench
17. Dust bag
18. Bevel lock button
19. Lock lever
20. Hex Wrench
21. Rear Anti-Tip
22. Extension Arm
Keep this MANUAL in a handy place and read before
operating the saw.
TECHNICAL SPECIFICATIONS
Input 240V ~ 50 Hz
Power
1200W
Safety class IP20
Tilt angle max. 45°
Speed 4500/ min
Cut depth at 90° max. 45 mm
Cut width at 90° max. 115 mm
Saw blade max. diameter 210 mm
bore 16 mm
Weight 7 kg
INSTRUCTIONS FOR SAFE HANDLING
USE:
Stationary
, precise cutting of wood and wood- product of
varying lengths and shapes in a domestic environment.
The tool and accessories should be used only as
intended.
GENERAL SAFETY INSTRUCTIONS FOR USING
ELECTRIC POWER TOOLS
WARNING!
When using electric power tools, follow these guidelines
to protect yourself from electric shocks, injury and the
risk of fire.
Read and follow all these instructions before using
this electric power tool. Pay attention to the safety
instructions.
■ For safe working:
■ Keep your work area tidy.
■ An untidy work area can lead to accidents.
■ Operate tool in a suitable area.
■ Do not use electric power tools in the rain. Do not use
electric power tools in a wet or damp environment.
Ensure you have good lighting. Do not use electric
power tools close to flammable liquids or gases.
■ Protect yourself from electrical shocks.
Avoid touching earthed items such as pipes, heaters,
ovens or refrigerators.
■ Keep children away.
Do not allow other people to touch the electric power
tool or cable. Keep other people away from your work
area.
■ Keep your electric power tools safe.
Unused power tools should be stored in a dry, elevated
or locked place out of the reach of children.
■ Do not overload electric power tools.
You will work better and safer within the specified
limits.
Use the dust collector.
If you have accessories for attaching dust suction and
collection devices, make sure these are attached and
used correctly.
■ Use the correct electric power tool for the job.
Do not use low-power tools for heavy work. Use the
tool only for the intended purpose.
■ Wear suitable clothing.
Do not wear loose clothing or jewellery which
could catch in moving parts. Non-slip footwear are
recommended for outdoor work. If you have long hair,
tie it back.
■ Wear protective glasses.
Use a face mask if producing a lot of dust.
EMS-1221 manual(SAA).indd Sec1:4EMS-1221 manual(SAA).indd Sec1:4 8/6/07 2:17:09 PM8/6/07 2:17:09 PM
To Next Page
Loading...
