3
your exposure to these chemicals: work in a
well
ventilated area, and work with approved
safety equipment, such as dust masks that
are
specially designed to filter out microscopic
particles.
SPECIFICATIONS
Voltage : 240V ~ 50Hz
No load speed : 14000-31500min
-1
Input power : 1250W
Plunge depth : 55mm
Collet size : 6.35mm or 12.7mm
DESCRIPTION
1. Speed selection
sight window
2. Variable speed control
3. Handle
4. Lock-off button
5. Spindle lock button
6. Parallel guide lock knob
7. Chip shield
8. Depth stop
20. Parallel guide
21. Cutter
22. Collet nut
23. Threaded post
24. Collet
25. Router bits
26. Work-piece
27. Dust port
28. Depth of cut
9. Depth stop bar
29. Width of cut
10. Depth stop bar lock knob
30. 1st pass
11. Depth zero reset indicator
31. 2nd pass
12. Scale
32.
Fine height adjuster knob
13. Power cord
33. Fine height adjuster
14. Plunge lock lever
quick release button
15. Switch
34. Livetool Indicator
TM
16. Router base
35. Template guide
17. Sub-base
36. Screw
18. Collet adaptor
19. Spanner 23.8mm
APPLICATIONS
Use your router only for the purposes listed below:
■
Routing grooves, shaping edges, freehand designs,
etc. in wood.
■
Chamfering, rabbeting, dadoing, and dovetailing in
wood.
■
Routing edges on laminates.
FEATURES
Your plunge router is a versatile woodworking tool that
will give you years of trouble-free performance. It is
engineered with the professional in mind, but its ease
of operation allows the amateur to produce work that is
beautiful and precise. As the name implies your plunge
router can be used for making plunge cuts in workpieces,
routing grooves, edge routing, routing circles and freehand
routing. When used with recommended accessories, such
as a router table, depth adjustment knob and straight guide;
it becomes even more versatile. Various types of cutters,
both with and without roller bearings as guides, also add
to the versatility of this tool.
HEAVY DUTY MOTOR
Your router has a powerful motor with sufficient power to
handle tough routing jobs. It delivers 1.5 horsepower for
heavy duty performance.
CHIP SHIELD
A plastic chip shield has been provided on the base of
your router for protection against flying dust and chips.
It is designed to fit the front opening of the router base.
SPINDLE LOCK
The spindle lock secures the spindle so that only one
wrench is needed to loosen collet nut and change
cutters. To operate push the button whilst loosening the
collet nut. NOTE: Do not run router with spindle lock engaged.
To Next Page
Loading...
