9
PRODUCT SPECIFICATIONS
Edger attachment
Model
AED05
Weight
1.82 kg
Blade length
204 mm
Edging depth
Adjustable from 12 mm to
57 mm
Cutting swath
204 mm
Recommended torque for blade
≥ 13 Nm
For assembling with petrol-driven power head (Below values
measured on RLT254FSDSN or RPH2540 power heads)
- Powerhead weight 5.31 kg
Fuel tank volume
580 ml
Engine displacement
25.4 cc
Maximum engine performance (in
accordance with ISO 8893)
0.9 kW
Maximum rotational frequency of
the spindle
10,000 min
-1
Engine speed (rotational
frequency at idle
2600-3200 min
-1
Fuel consumption (in accordance
with ISO 8893) at max. engine
performance
0.54 kg/h (0.58L/h)
Specic fuel consumption (in
accordance with ISO 8893) at
max. engine performance
0.6 kg/kW.h
Vibration level (in accordance with ISO 11789)
Front handle
0.84 m/s²
Rear handle
1.34 m/s²
Uncertainty of vibration
measurement
1.5 m/s²
Noise emission level ( in accordance with ISO 11789)
A-weighted emission sound
pressure level at the operator’s
position
107.1 dB(A)
Uncertainty
3.0 dB(A)
For assembling with electric-driven power head (Below
values measured on RLT1238 or RPH1200A power head)
Rated power 1200 W
Rated voltage 230-240 V ~ 50 Hz
Maximum no-load speed
5850 min
-1
Power head weight
3.15 kg
Vibration Level (in accordance with AS/NZS 60335.2.91 Annex
BB)
Front handle
Rear handle
0.4 m/s²
1.3 m/s²
Uncertainty of measurement
1.5 m/s²
Noise emission level ( in accordance with AS/NZS 60335.2.91
Annex CC)
A-weighted sound pressure level
at the operator’s position
Uncertainty of measurement
88.3 dB(A)
2.5 dB
A-weighted sound power level
Uncertainty of measurement
99.1 dB(A)
2.5 dB
For assembling with battery-driven power head (Below
values measured on RLT36X33S, RLT36B33S or RPH3600
power heads)
Rated voltage DC 36 Volts
Maximum no-load speed
5000 min
-1
Power head weight without battery
pack
2.34 kg
Vibration Level (in accordance with AS/NZS 60335.2.91 Annex
BB)
Front handle
Rear handle
0.2 m/s²
0.2 m/s²
Uncertainty of measurement
1.5 m/s²
Noise emission level ( in accordance with AS/NZS 60335.2.91
Annex CC)
A-weighted sound pressure level
at the operator’s position
Uncertainty of measurement
89.1 dB(A)
2.5 dB
A-weighted sound power level
Uncertainty of measurement
95.1 dB(A)
2.5 dB
REPLACEMENT PART
Blade
LTA065
To Next Page