TROUBLESHOOTING
Problem Possible cause Solution
Bar and chain
running hot and
smoking.
Check chain tension
for over tight condition
Tension chain.
Refer to Chain
Tension section in
this manual.
Chain oil tank empty. Check oil tank.
Motor runs, but
chain is not
rotating.
Chain tension too
tight.
Retension chain,
Refer to Chain
Tension section in
this manual.
Check guide bar and
chain assembly.
Refer to
Assembling the
Bar and Chain
section in this
manual.
Check guide bar and
chain for damage.
Inspect guide
bar and chain for
damage.
PRODUCT SPECIFICATIONS
Cordless Chainsaw
Model OCS1825
Rated voltage DC 18 Volts
Bar length 25.4 cm
Chain oil tank capacity
120 ml
Weight (without battery pack, with
guide bar, chain and empty tank)
2.6 kg
Usable cutting length 16.0 cm
Chain speed
3.6 m/s
BATTERY AND CHARGER
Compatible charger
(not included)
BCL14181H, BCL14183H
Compatible battery
packs (not included)
BPL-1815, BPL-1820, RB18L13,
RB18L15, RB18L25, RB18L26, RB18L40,
RB18L50
REPLACEMENT PART (BAR AND CHAIN)
Manufacturer Tri-link
Chain CL14340XPB
Bar M1431040- 1041HL
Chain must be fi tted with bar from the same manufacturer
according to above combinations.
To Next Page
Loading...
Need help?
General
