Ryobi OP406 User Manual

OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
40 VOLT LITHIUM-ION RAPID CHARGER
CHARGEUR RAPIDE 40 V LITHIUM-ION
CARGADOR RÁPIDA
IONES DE LITIO DE 40 V
OP406/OP406VNM
 Safety Rules for Charger ....................2
Symbols ..............................................3
 Assembly ............................................ 4
 Operation .........................................4-5
 Maintenance ....................................... 6
 Illustrations .........................................7
 Parts Ordering/Service ........Back page
 Règles de sécurité pour le chargeur ..2
Symboles ............................................3
 Assemblage ........................................4
 Utilisation .........................................4-5
 Entretien .............................................6
 Illustrations .........................................7
 Commande de pièces
et réparation ..................... Page arrière
WARNING: To reduce the
risk of injury, the user must read and
understand the operator’s manual
before using this product.
 Reglas de seguridad para el
empleo del cargador ......................... 2
Símbolos ............................................ 3
 Armado .............................................. 4
 Funcionamiento .............................. 4-5
 Mantenimiento ................................... 6
 Ilustraciones ...................................... 7
 Pedidos de piezas
y servicio ........................ Pág. posterior
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe
leer y comprender el manual del
operador antes de usar este producto.
AVERTISSEMENT : Pour
réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant
d’employer ce produit.
TABLE DES MATIÈRES ÍNDICE DE CONTENIDOTABLE OF CONTENTS
**************** **************** ****************
SAVE THIS MANUAL FOR
FUTURE REFERENCE
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS

Ryobi OP406 Specifications

General

Input Voltage	120V AC
Charging Time	60 minutes
Battery Compatibility	Ryobi 40V batteries
Voltage	40V
Chemistry	Lithium-ion

Summary

Safety Rules for Charger

Important Safety Instructions

Key safety and operating instructions for battery charger OP406, including warnings.

Symbols

Signal Words and Risk Levels

Defines signal words like DANGER, WARNING, CAUTION, and NOTICE indicating risk levels.

Product Symbols and Meanings

Explains common symbols used on the product, such as safety alert, eye protection, and wet conditions.

Assembly

Assembly Safety Warnings

Highlights critical safety precautions to follow during product assembly to prevent injury.

Operation

Applications

Specifies the intended purpose of the product: charging RYOBI 40 Volt lithium-ion batteries.

Charging Procedure

Details the steps for connecting the charger, attaching the battery, and the charging process.

Charging a Hot Battery Pack

Explains how the charger handles a battery pack that is too hot to charge immediately.

Charging a Cold Battery Pack

Describes the process for charging a battery pack that is too cold for immediate charging.

LED Functions

Details the status indicators (LEDs) for Power On, Testing, Error, Charging, and Ready states.

Maintenance

Maintenance Safety Warnings

Emphasizes using identical replacement parts and removing the battery pack before maintenance.

General Maintenance

Provides instructions on cleaning plastic parts using clean cloths and avoiding solvents.

Storage Instructions

Advises removing the battery pack before storing the charger or when it is unplugged.

Parts and Service

Obtaining Replacement Parts

Information on how to purchase replacement parts online or by phone.

Locating a Service Center

Guidance on finding authorized service centers via website or phone.

Customer and Technical Support

Contact information for customer service and technical assistance.