Do you have a question about the Ryobi P137 and is the answer not in the manual?
Input Voltage | 120V AC |
---|---|
Output Voltage | 18V DC |
Compatibility | Ryobi 18V ONE+ Batteries |
Charging Time | 60 minutes (for P108 battery) |
Chemistry | Lithium-ion |
Indicator Lights | Yes |
Indicates a potential personal injury hazard.
User must read and understand manual before using product.
Always wear eye protection with side shields marked to ANSI Z87.1.
Do not expose to rain or use in damp locations.
Risk of fire and burns. Do not expose battery, battery compartment, or electronic components to rain, water, or liquids.
Specifies the intended uses for the battery charger, including charging 18V and 40V Lithium-ion battery packs.
Instructions for mounting the charger using the keyhole feature, including screw spacing for vertical and horizontal mounting.
Covers basic charging steps, power requirements, and handling of battery packs during charging.
Explains how charging is affected by battery pack temperature (hot or cold) and associated LED indicators.
Guidance on cleaning plastic parts using clean cloths and avoiding solvents.
Warning against contact of plastic parts with brake fluid, gasoline, petroleum products, or penetrating oils.
Recommendation to always remove the battery pack before storing the charger or when unplugged.