To Next PageTo Next PageWhat to do if Ryobi Chainsaw motor runs, but the chain is not rotating?
If the Ryobi Chainsaw motor is running but the chain isn't rotating, it could be due to the chain tension being too tight, or there may be damage to the guide bar and chain assembly. Try re-tensioning the chain, and inspect the guide bar and chain for any signs of damage.
General| Type | Cordless |
|---|---|
| Power Source | Battery |
| Voltage | 40V |
| Automatic Oiler | Yes |
| Battery Included | No |
| Charger Included | No |
| Battery Compatibility | Ryobi 40V |
Guidelines for maintaining a safe and clean work environment to prevent accidents.
Precautions regarding electrical hazards, including plugs, cords, and water exposure.
Advice on staying alert, using PPE, and avoiding distractions for operator protection.
Instructions on proper tool usage, avoiding force, and selecting the right tool for the job.
Guidelines for safe charging, usage, and storage of battery packs.
Recommendations for professional servicing and use of identical replacement parts.
Advice on body positioning, grip, carrying, and general operation of the pruning saw.
Detailed explanation of kickback causes and precautions to avoid it.
Rules for safe operation including avoiding damage, proper stance, and not forcing the tool.
Detailed explanation of kickback, its causes, and ways to minimize the risk.
Information on low kickback chain and guide bars for enhanced safety.
Explanation of DANGER, WARNING, CAUTION, and NOTICE signal words used in the manual.
Meanings of various safety symbols found on the product and in the manual.
Technical details of the pruning chain saw, including motor, bar length, and chain speed.
Advice on understanding the product, its features, and safety rules before operation.
Steps for unpacking, checking parts, and inspecting for damage before use.
Instructions for installing the SAFE-T-TIP™ nose guard for kickback prevention.
Intended uses of the pruning chain saw, such as limbing and woodcutting.
Procedure for safely installing and removing the battery pack from the tool.
Step-by-step guide on how to safely start and stop the pruning chain saw.
Instructions on how to hold the saw firmly with both hands for control and safety.
Guidance on maintaining a stable stance with feet on solid ground for safe cutting.
Step-by-step instructions for performing basic cuts with the chain saw.
Safety rules for the work environment, including material restrictions and bystander safety.
Specific techniques and safety advice for removing branches from a fallen tree.
Steps and safety considerations for trimming limbs from a live tree.
Warning and safety advice regarding springpoles and their hazardous nature.
Basic cleaning and care instructions, avoiding solvents and corrosive liquids.
Procedure for replacing the guide bar and saw chain.
Detailed steps for properly adjusting the chain tension for optimal performance and safety.
Guidance on maintaining the chain, including sharpening and checking for wear.
Instructions on how to lubricate the guide bar and chain.
Step-by-step guide on sharpening the chain cutters using specific angles and tools.
Correct angles for filing the top plate of the chain cutters.
Correct angles for filing the side plate of the chain cutters.
How to check and maintain the depth gauge clearance for safe cutting.
Procedures for cleaning, checking, and maintaining the guide bar's condition.
Instructions for installing and maintaining the SAFE-T-TIP™ nose guard.
Guidelines for safely transporting and storing the pruning chain saw.
