17 – English
ASSEMBLY
INSTALLING BATTERIES FOR LASER
See Figure 21.
The laser battery compartment is located inside the battery
port for the 18 volt battery pack.
Loosen the screw from battery compartment cover using
the Phillips end of the supplied blade wrench. Remove
cover and set aside.
Install two AAA batteries according to polarity indicators
on the battery compartment cover.
Replace the battery compartment cover. Reinstall screw
and tighten securely.
DANGER:
Laser radiation. Avoid direct eye contact with light source.
WARNING:
Use of controls or adjustments or performance of pro-
cedures other than those specified herein may result in
hazardous radiation exposure.
BATTERIES
BATTERY
COMPARTMENT
COVER
LASER GUIDE
SWITCH
Fig. 21
To Next Page
Loading...
