Ryobi PBLCS300 User Manual

OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
7-1/4 in. 18 VOLT BRUSHLESS
CIRCULAR SAW
SCIE CIRCULAIRE À MOTEUR SANS
BALAI DE 184 mm (7-1/4 po) 18 V
SIERRA CIRCULAR SIN ESCOBILLAS
DE 184 mm (7-1/4 pulg.) 18 V
PBLCS300
WARNING: To reduce the
risk of injury, the user must read and
understand the operator’s manual
before using this product.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe leer
y comprender el manual del operador
antes de usar este producto.
AVERTISSEMENT : Pour
réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant
d’employer ce produit.
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
INCLUDES: Circular Saw, 7-1/4 in. Blade,
Blade Wrench, Vacuum Attachment, Screw,
Operator’s Manual
TABLE OF CONTENTS
****************
 General Power Tool Safety
Warnings .........................................2-3
 Circular Saw Safety Warnings .........3-4
 Symbols ..............................................5
 Features ..............................................6
 Assembly .........................................6-7
 Operation .......................................7-10
 Adjustments .....................................10
 Accessories ......................................11
 Maintenance ..................................... 12
 Troubleshooting ................................ 12
 Illustrations ..................................13-15
 Parts Ordering/Service ....... Back Page
INCLUT : Scie circulaire, lame de 184 mm
(7-1/4 po), clé de lame, accessoire
d’aspiration, vis manuel d’utilisation
TABLE DES MATIÈRES
****************
 Avertissements de sécurité relatives
aux outils électriques ......................2-3
 Avertissements de sécurité relatifs
au scie circulaire .............................3-4
 Symboles ............................................5
 Caractéristiques .................................6
 Assemblage .....................................6-7
 Utilisation .......................................7-10
 Réglages ...........................................10
 Accessoires ......................................11
 Entretien ...........................................12
 Dépannage .......................................12
 Illustrations ..................................13-15
 Commande de pièces/
réparation ..........................Page arrière
INCLUYE: Sierra circular, hoja de 184 mm
(7-1/4 pulg.), llave de la hoja, accesorio de
aspiradora, tornillo, manual del operador
ÍNDICE DE CONTENIDO
****************
 Advertencias de seguridad
para herramientas eléctricas ...........2-3
 Advertencias de seguridad
sierra circular ...................................3-4
 Símbolos ............................................5
 Características ...................................6
 Armado ............................................6-7
 Funcionamiento .............................7-10
 Ajustes ..............................................10
 Accesorios ........................................11
 Mantenimiento ..................................12
 Corrección de problemas ................. 12
 Ilustraciones ................................13-15
 Pedidos de piezas/
servicio .......................... Pág. posterior

Ryobi PBLCS300 Specifications

General

Brand	Ryobi
Model	PBLCS300
Category	Saw
Language	English

Summary

General Power Tool Safety

Work Area Safety

Safety precautions for the work environment, including lighting and avoiding hazardous atmospheres.

Electrical Safety

Guidelines for safe use of electrical power tools, including plugs, cords, and grounding.

Personal Safety

Advice on maintaining alertness, using protective equipment, and avoiding distractions during operation.

Power Tool Use and Care

Instructions on proper tool usage, maintenance, and care to ensure safety and longevity.

Battery Tool Safety and Service

Battery Tool Use and Care

Guidelines for safe operation and maintenance of battery-powered tools.

Service Procedures

Information on how to obtain service and support for the power tool.

Circular Saw Safety Warnings

Cutting Procedures

Best practices for making cuts with the circular saw, including blade depth and workpiece support.

Kickback Prevention

Explains kickback, its causes, and how to prevent it for safe saw operation.

Lower Guard Function

Details on the proper operation and importance of the lower blade guard for safety.

Additional Safety Precautions

Further safety advice covering tool use, battery handling, and protective measures.

Product Features and Assembly

Product Specifications

Technical details and specifications of the circular saw, including motor and blade dimensions.

Unpacking and Assembly

Instructions for safely removing the product, checking contents, and assembling the saw.

Operation and Usage

Blade Installation and Removal

Procedures for attaching, removing, and selecting appropriate saw blades.

Battery Pack Management

How to install, remove, and safely handle the battery pack.

Saw Operation Basics

Covers starting/stopping, lock-off button, blade guard, and vacuum attachment.

Cutting Techniques

Guidance on depth adjustment, cross/rip cuts, bevel cuts, and pocket cuts.

Using Edge Guides

Instructions for using optional edge guides for straight rip cuts and rip cutting without one.

Adjustments

Bevel Adjustments

How to adjust and check the 0° bevel stop and make bevel cuts.

Depth Lock Lever Adjustment

Procedure for recalibrating the depth lock lever if it loses its original setting.

Maintenance and Troubleshooting

General Maintenance

Routine maintenance tips for cleaning and caring for the circular saw.

Troubleshooting LED Lights

Interpretation of LED light indicators for diagnosing tool status and potential issues.