Ryobi PBLIW01 User Manual

 General Power Tool
Safety Warnings ..............................2-3
฀ Impact Wrench Safety Warnings ........4
฀Symbols ..............................................5
฀Features ..............................................5
฀฀ Assembly ............................................ 6
฀ Operation .........................................6-8
฀ Maintenance ....................................... 8
฀ Troubleshooting .................................. 8
 Illustrations .........................................9
฀ Parts Ordering and
Service ................................Back page
 Avertissements de sécurité générales
relatives aux outils électriques ........2-3
฀ Avertissements de sécurité relatifs
au clé à chocs .................................... 4
฀Symboles ............................................5
฀Caractéristiques .................................5
฀฀ Assemblage ........................................6
฀ Utilisation ........................................6-8
฀ Entretien .............................................8
฀ Dépannage .........................................8
฀ Illustrations .........................................9
฀ Commande de pièces et
dépannage ........................Page arrière
฀ Advertencias de seguridad
para herramientas eléctrica ........... 2-3
฀ Advertencias de seguridad
destornillador de impacto ..................4
฀฀Símbolos ............................................5
฀฀ Características ...................................5
฀฀ Armado ..............................................6
฀ Funcionamiento ............................. 6-8
฀ Mantenimiento ...................................8
฀ Corrección de problemas ..................8
฀ Illustraciones ......................................9
฀฀ Pedidos de piezas y
servicio .........................Pág. posterior
WARNING:
To reduce the risk of injury, the user
must read and understand the opera-
tor’s manual before using this product.
AVERTISSEMENT :
Pour réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien com-
prendre le manuel d’utilisation avant
d’utiliser ce produit.
ADVERTENCIA:
Para reducir el riesgo de lesiones, el
usuario debe leer y comprender el
manual del operador antes de usar este
producto.
TABLE OF CONTENTS TABLE DES MATIÈRES ÍNDICE DE CONTENIDO
SAVE THIS MANUAL
FOR FUTURE REFERENCE
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
18V BRUSHLESS 4-MODE 1/2 in.
HIGH TORQUE IMPACT WRENCH
CLÉ À CHOCS À COUPLE ÉLEVÉ DE
1/2 po (1/2 in.) SANS BALAIS DE 18 V À 4 MODES
LLAVE DE IMPACTO DE 1/2 pulg. (1/2 in.) Y
ALTA FUERZA DE TORSIÓN DE 4 MODOS SIN
ESCOBILLAS DE 18 V
PBLIW01

Ryobi PBLIW01 Specifications

General

Type	Impact Wrench
Voltage	18V
Max Torque	300 ft-lbs
Impacts Per Minute	0-3, 200 IPM
Battery Type	Lithium-ion
Drive Size	1/2 in.
No Load Speed	2, 600 RPM
Chuck Size	1/2 in.

Summary

General Power Tool Safety Warnings

Personal Safety

Ensures operator alertness, common sense, and use of personal protective equipment for reduced injury risk.

Work Area Safety

Advises on maintaining a clean, well-lit work area and keeping children and bystanders away.

Electrical Safety

Covers matching plugs to outlets, avoiding grounded surfaces, and using outdoor/GFCI-protected cords.

Power Tool Use and Care

Power Tool Use and Care

Guidelines on not forcing tools, ensuring switch functionality, and proper maintenance for safe operation.

Battery Tool Use and Care

Instructions for charging, using, and handling battery packs to prevent fire or injury risks.

Service

Emphasizes using qualified personnel and identical replacement parts for maintaining tool safety.

Impact Wrench Safety Warnings

Symbols

Signal

Defines signal words like DANGER, WARNING, CAUTION, and NOTICE to explain risk levels.

Designation/Explanation

Explains common symbols used on the product for safety and operational guidance.

Features

Product Specifications

Details key specifications including speed, anvil size, impacts per minute, and torque ratings.

Assembly

Installing/Removing Belt Hook

Instructions for attaching or detaching the belt hook to the tool housing.

Variable Speed Switch Trigger

Explains how the trigger controls speed and how to turn the tool on and off.

Direction of Rotation Selector

Details how to set the selector for forward, reverse, or center lock (off) positions.

Operation

Installing/Removing Battery Pack

Guide to correctly inserting and removing the battery pack, ensuring it is secured.

Installing and Removing Sockets

Instructions for selecting and attaching impact wrench sockets to the anvil.

Tri-Beam LED Lights

Information on the LED lights that illuminate the work area when the tool is active.

Mode Selector

Explains the function of different speed modes (Low, Medium, High, Auto) for various applications.

Operating the Impact Wrench

Guidance on proper handling, fastening time determination, and torque checking.

Maintenance

General Maintenance

Advice on cleaning plastic parts using clean cloths and avoiding solvents.

Troubleshooting

LED Light Functions

Lists LED light scenarios (Normal, Low Battery, Excessive Force, Over Temperature) and required actions.