Ryobi PBLMT50 User Manual

OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
18 VOLT OSCILLATING
MULTI-TOOL
OSCILLANT OUTIL
POLYVALENT 18 V
OSCILANTE
MULTI-HERRAMIENTAS 18 V
PBLMT50
WARNING: To reduce the risk
of injury, the user must read and un-
derstand the operator’s manual before
using this product.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe
leer y comprender el manual del
operador antes de usar este producto.
AVERTISSEMENT :
Pour réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant
d’employer ce produit.
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
TABLE OF CONTENTS
****************
 General Power Tool
Safety Warnings
.............................. 2-3

Multi-Tool Safety Warnings .............3-4
Symbols
...........................................4-5
Features
.............................................. 5

Assembly ............................................ 5

Operation .........................................6-8

Maintenance ....................................... 8
Troubleshooting
.................................. 8

Illustrations ......................................... 9

Parts Ordering
and Service
......................... Back page
TABLE DES MATIÈRES
****************
 Avertissements de sécurité générales
relatives aux outils électriques ........ 2-3

Avertissements de sécurité relatifs au
outil polyvalent ....................................4
Symboles
............................................. 5
Caractéristiques
..................................5

Assemblage ......................................... 6

Utilisation ........................................ 6-8

Entretien .............................................8
Dépannage
..........................................8

Illustrations ..........................................9

Commande de pièces
et dépannage
.................... Page arrière
ÍNDICE DE CONTENIDO
****************
 Advertencias de seguridad para
herramientas eléctrica
.................... 2-3

Advertencias de seguridad para
multi-herramientas
..............................4
Símbolos
.............................................5
Características
....................................5

Armado ................................................6

Funcionamiento ............................... 6-8

Maintenimiento ................................... 8
Corrección de problemas
.................... 8

Illustraciones .......................................9

Pedidos de piezas
y servicio
........................ Pág. posterior

Ryobi PBLMT50 Specifications

General

Brand	Ryobi
Model	PBLMT50
Category	Power Tool
Language	English

Summary

General Power Tool Safety Warnings

Work Area Safety

Safety guidelines for the work environment.

Electrical Safety

Precautions related to electrical hazards.

Personal Safety

Guidelines for operator's personal safety.

Power Tool Use and Care

Safe usage and maintenance advice for power tools.

Multi-Tool Safety Warnings

Battery Tool Safety

Safety precautions specific to battery-powered multi-tools.

Battery Tool Use and Care

Safe practices for battery tool operation and storage.

Service

Guidelines for tool servicing and repair.

Symbols

Signal Words and Meanings

Definitions of DANGER, WARNING, CAUTION, NOTICE.

Product Symbols

Explanations of symbols used on the product.

Features

Product Specifications

Technical specifications including speed and oscillation.

Assembly

Operation

On/Off Switch

Instructions for operating the power switch.

Variable Speed Dial

How to adjust the tool's speed settings.

Installing/Removing Battery Pack

Procedure for inserting and removing the battery.

Installing Accessories

Steps for attaching and detaching cutting accessories.

Cutting

Techniques and tips for performing cutting operations.

Sandpaper Selection

Guidance on choosing the right sandpaper grit.

Sanding

Proper technique for sanding operations.

Maintenance

General Maintenance

Routine cleaning and care instructions.

Troubleshooting

LED Light Functions

Interpreting LED light signals for tool status.

Illustrations

Service and Parts