CHARGING THE BATTERY PACK
Battery packs are shipped in a low charge condition to prevent possible problems. Therefore, you should charge prior
to first use. If the charger does not charge the battery pack under
normal circumstances, return both the battery pack and charger to your nearest Authorized Service Center for
electrical check.
Charge the battery pack only with the recommended charger.
Refer to charger operator’s manual for charging instructions.
CHARGING A HOT BATTERY PACK
When using a tool continuously, the battery pack may become hot. A hot battery pack may be placed directly onto
the charger port but charging will not begin until the battery temperature cools to within acceptable temperature
range. When a hot battery pack is placed on the charger, the charger may indicate the pack is not ready to charge.
Please refer to charger operator’s manual.
When the battery pack cools, the charger will automatically begin charging.
To Next Page
Loading...
