Ryobi PCL500 User Manual

OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
5-1/2 in. 18 VOLT CIRCULAR SAW
SCIE CIRCULAIRE DE 140 mm
(5-1/2 po) 18 V
SIERRA CIRCULAR DE 140 mm
(5-1/2 pulg.) 18 V
PCL500
WARNING: To reduce the
risk of injury, the user must read and
understand the operator’s manual
before using this product.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe leer
y comprender el manual del operador
antes de usar este producto.
AVERTISSEMENT : Pour
réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant
d’employer ce produit.
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
INCLUDES: Circular Saw, 5-1/2 in. Blade,
Blade Wrench, Operator’s Manual
TABLE OF CONTENTS
****************
 General Power Tool Safety
Warnings .........................................2-3
 Circular Saw Safety Warnings .........3-4
 Symbols ..............................................5
 Features ..............................................6
 Assembly .........................................6-7
 Operation .......................................7-10
 Adjustments .....................................11
 Maintenance ..................................... 11
 Accessories ......................................12
 Illustrations ..................................13-16
 Parts Ordering / Service ..... Back Page
INCLUT : Scie circulaire, lame de 140 mm
(5-1/2 po), clé de lame, manuel d’utilisation
TABLE DES MATIÈRES
****************
 Avertissements de sécurité relatives
aux outils électriques ......................2-3
 Avertissements de sécurité relatifs
au scie circulaire .............................3-4
 Symboles ............................................5
 Caractéristiques .................................6
 Assemblage .....................................6-7
 Utilisation .......................................7-11
 Réglages ...........................................11
 Entretien ...........................................12
 Accessoires ......................................12
 Illustrations ..................................13-16
 Commande de pièces /
réparation ..........................Page arrière
INCLUYE: Sierra circular, hoja de 140 mm
(5-1/2 pulg.), llave de la hoja, manual del
operador
ÍNDICE DE CONTENIDO
****************
 Advertencias de seguridad
para herramientas eléctricas ...........2-3
 Advertencias de seguridad
sierra circular ...................................3-4
 Símbolos ............................................5
 Características ...................................6
 Armado ............................................6-7
 Funcionamiento .............................7-11
 Ajustes ..............................................11
 Mantenimiento ..................................12
 Accesorios ........................................12
 Ilustraciones ................................13-16
 Pedidos de piezas /
servicio .......................... Pág. posterior

Ryobi PCL500 Specifications

General

Type	Circular Saw
Power Source	Battery
Battery Voltage	18 V
Voltage	18 V
Weight	5.4 lbs
Blade Diameter	6.5 inches
Blade Size	6.5 inches
Battery Compatibility	Ryobi ONE+
Max Cutting Depth	2-1/8 in
Max Cutting Depth at 90°	2-1/8 in

Summary

General Power Tool Safety Warnings

Work Area Safety

General guidelines for maintaining a safe and organized workspace.

Electrical Safety

Precautions related to power tools and electrical connections.

Personal Safety

Guidelines for operator's alertness, protective equipment, and general well-being.

Power Tool Use and Care

Proper usage, maintenance, and care instructions for power tools.

Battery Tool Use and Care

Specific instructions for using and caring for battery-powered tools.

Service

Recommendations for professional servicing and part replacement.

Circular Saw Safety Warnings

Cutting Procedures

Safe practices and techniques for making cuts with the circular saw.

Kickback Causes and Related Warnings

Explains kickback and how to prevent it.

Lower Guard Function

Importance and operation of the lower blade guard.

Additional Safety Warnings

Further safety precautions for specific situations and battery use.

Symbols

Signal

Explains signal words (Danger, Warning, Caution, Notice) and their meanings.

Safety Symbols

Symbols related to personal safety, warnings, and precautions.

Technical Symbols

Symbols indicating electrical characteristics, speed, and time measurements.

Features

Product Specifications

Technical details and specifications of the circular saw.

Unpacking

Instructions for removing the product and checking included items.

Assembly

Steps for assembling the circular saw and its components.

Attaching the Blade

Detailed procedure for safely installing the saw blade.

Operation

Removing the Blade

Procedure for safely removing the saw blade from the tool.

Installing/Removing Battery Pack

How to install and remove the battery pack from the tool.

Kickback

Explanation and prevention of kickback during saw operation.

Applications

Lists the intended uses and applications for the circular saw.

Saw Blades

Information on selecting, maintaining, and using saw blades.

Blade Guard System

Details on the function and importance of the blade guard.

Starting/Stopping the Saw

Procedures for safely starting and stopping the circular saw.

Lock-off Button

Explanation of the lock-off button for preventing accidental starts.

Installing the Vacuum Adaptor (Optional)

Instructions for attaching an optional vacuum adapter for dust collection.

Adjusting Blade Depth

How to set the correct blade depth for safe and effective cutting.

General Operating Guidelines

Tips and general procedures for operating the circular saw safely.

Cutting Techniques and Scales

Procedures for cross cutting, rip cutting, width scale, and bevel cutting.

Adjusting the Bevel Setting

How to adjust the bevel angle for angled cuts.

Making a Bevel Cut

Step-by-step guide for performing a bevel cut.

Pocket Cutting

Procedure for making plunge or pocket cuts safely.

Using Optional Edge Guide

How to use an optional edge guide for accurate cuts.

Adjustments

0° Bevel Stop

Information about the factory set 0° bevel stop.

Checking 0° Bevel Stop

How to verify the accuracy of the 0° bevel stop.

Adjusting 0° Bevel Stop

Procedure for adjusting the 0° bevel stop if necessary.

Maintenance

General Maintenance

Routine cleaning and care to maintain the tool.

Accessories

Available Accessories

List of optional accessories available for the circular saw.