Ryobi P530 User Manual

OPERATOR’S MANUAL
18 VOLT
SPEED SAW™
P530
SAVE THIS MANUAL FOR FUTURE REFERENCE
Your speed saw has been engineered and manufactured to Ryobi’s high standard for dependability, ease of operation, and
operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using
this product.
Thank you for buying a Ryobi product.
BATTERIES AND CHARGERS
SOLD SEPARATELY

Ryobi P530 Specifications

General

Type	Reciprocating Saw
Motor	Brushless
Power Source	Battery
Voltage	18V
Battery Compatibility	Ryobi 18V ONE+
Stroke Length	1-1/8 inch

Summary

General Safety Rules

Work Area Safety

Keep work area clean and well lit to prevent accidents.

Electrical Safety

Use correct charger and battery pack; avoid cord damage.

Personal Safety

Stay alert, dress properly, avoid accidental starting, remove wrenches.

Specific Safety Rules

Battery Tool Safety

Precautions for battery-powered tools, including charging and handling.

Usage Environment Safety

Safety regarding temperature and potential battery leakage.

Safety Rules for Charger

Charger Use Precautions

Rules for safe charger operation, cord usage, and environmental conditions.

Extension Cord Usage

Guidelines for selecting and using extension cords with the charger.

Charger Damage and Repair

Procedures for handling damaged chargers and avoiding misuse.

Signal Words and Safety Alerts

Signal Word Definitions

Meanings of DANGER, WARNING, and CAUTION signal words.

Service Warnings

Warnings related to tool servicing and repair procedures.

Operation

Attaching Circle Cutter

Steps to attach the circle cutter to the speed saw.

Applications

Battery Charging Caution

Battery Charging and LED Functions

LED Status Indicators

Charging Battery Packs

Operating the Speed Saw

Installing and Removing Battery Pack

Starting and Stopping

Cutting Techniques

Using the Circle Cutter

Circle Cutting Procedure

Cutting Caution

Adjustments

Inserting and Removing Bits

Adjusting Depth of Cut