EasyManuals Logo

Ryobi PCL720 User Manual

Ryobi PCL720
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
5 — English
WARNING:
Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a second
is sufficient to inflict serious injury.
WARNING:
Always remove battery pack from the tool when you are
assembling parts, making adjustments, cleaning, or when
not in use. Removing battery pack will prevent accidental
starting that could cause serious personal injury.
WARNING:
Do not use any attachments or accessories not recom-
mended by the manufacturer of this product. The use of
attachments or accessories not recommended can result
in serious personal injury.
APPLICATIONS
You may use this product for the following purpose:
Light-duty vacuuming of dry surfaces
Household type
INSTALLING/REMOVING BATTERY PACK
See Figure 1, page 8.
Place the battery pack in the stick vacuum. Align the
raised rib on the battery pack with groove in stick vacu-
um’s battery port.
Make sure the latches on each side of the battery pack
snap into place and that the battery pack is secured in
the stick vacuum before beginning operation.
Locate the latches on the side of the battery pack and
depress both sides to release the battery pack from the
stick vacuum.
OPERATION
INSTALLING THE WALL MOUNT
See Figure 2, page 8.
Choosethedesiredlocationforthewallmount.
Donotputhandsorobjectsinsideoffloornozzleattach-
ment as this could cause a malfunction of the tool or risk
of injury may occur.
Placethemountonthewallatthedesiredheight.Mark
the wall anchor locations. Install the anchors and screw
the mount to the wall.
Storethevacuumbyfirmlypressingtheunitintothewall
mount to secure.
Alwaysensurethevacuumissecurelylockedintoplace.
Accessoriescanbestoredbyinsertingthemfromthetop
of the accessory holder.
STARTING/STOPPING THE VACUUM
See Figure 3, page 8.
To start the vacuum: press the ON/OFF button.
Tostopthevacuum:press the ON/OFF button again.
HIGH/LOW SWITCH
See Figure 3, page 8.
The vacuum has two speeds to accommodate your clean-
ing needs.
NOTE: The vacuum always starts in high speed.
 PresstheECObuttonforLOWspeedandtheLEDindica-
tor illuminates white.
 PresstheECObuttontoreturntoHIGHspeedandthe
LED indicator illuminates green.
NOTE: Pressing the ECO switch repeatedly will toggle the
vacuum between the two speeds.
TURNING OFF THE ROLLER BRUSH
See Figure 3, page 8
The floor nozzle can be used with the roller brush turned off.
To cancel the roller brush:
Press the roller brush ON/OFF button, located below the
ECO button to cancel the use of the roller brush.
To reactivate the roller brush:
Press the roller brush ON/OFF button again to turn the
roller brush back on.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ryobi PCL720 and is the answer not in the manual?

Ryobi PCL720 Specifications

General IconGeneral
BrandRyobi
ModelPCL720
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals