6 − English
FEATURES
PRODUCT SPECIFICATIONS
Depth of Cut..................................................................2 in.
Collet..........................................................................1/4 in.
Peak Horsepower .................................................... 1.5 HP
No Load Speed ...................................25,000 r/min (RPM)
Input ............................... 120 V, 60 Hz, AC only, 8.5 Amps
ASSEMBLY
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
or with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories or attachments not recommended for use with this
product. Any such alteration or modification is misuse
and could result in a hazardous condition leading to
possible serious personal injury.
If any parts are damaged or missing, please call 1-800-525-2579 for assistance. In Mexico, please call 01-800-843-1111.
OPERATION
WARNING:
Do not allow familiarity with tools to make you care-
less. Remember that a careless fraction of a second is
sufficient to inflict serious injury.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Failure to do so could result in
objects being thrown into your eyes, resulting in possible
serious injury.
APPLICATIONS
You may use this tool for the purposes listed below:
Rout grooves, carve designs, mortise door jambs, and
create joints in wood and wood products
Cabinet making, routing counter tops, and finishing work
in wood and wood products
REMOVING/INSTALLING ROUTER BASE
See Figure 1, page 14.
To remove the base:
Unplug the router.
Place the router upside down with the Ryobi label away
from you.
To Next Page
Loading...
