To Next PageTo Next Page
Need help?Do you have a question about the Ryobi R1801M1 and is the answer not in the manual?
General| Brand | Ryobi |
|---|---|
| Model | R1801M1 |
| Category | Wood Router |
| Language | English |
Understand double insulation, avoid grounded surfaces, protect from rain/wet conditions, and care for cords.
Stay alert, use common sense, dress properly, avoid accidental starting, and maintain balance.
Hold tool by insulated surfaces when near wiring. Use caution with cutters.
Know your tool, wear safety glasses, protect lungs and hearing, inspect cords, check damaged parts, do not abuse cords, use proper extension cords, and avoid drugs/alcohol.
Explains critical safety symbols like 'Read Operator's Manual' and 'No Hands Symbol' for safe operation.
Reinforces the importance of wearing eye protection and thoroughly reading the operator's manual for safe use.
Guides on connecting to the correct power supply (120V, 60Hz AC) and avoiding DC.
Critical warnings about missing parts and not connecting power during assembly or maintenance to prevent injury.
Instructions for switching the router on/off, securing the cutter, setting depth, and feeding the workpiece.
Warnings about accidental starting if unplugged, and placing the router down only after the cutter has stopped.
Emphasizes disconnecting power before assembling, adjusting, or removing the router base to prevent accidental starting.
Critical safety advice on hot parts, secure collet tightening, and avoiding undersized or oversized cutters.
Stern warning against using large bits for freehand routing due to high risk of loss of control and serious injury.
