Ryobi R18PD5 - Product Specifications; Model and Voltage; Chuck and Switch Type; No Load Speeds (Drill;Percussion)

BATTERY AND CHARGER
Model
Compatible battery
pack (not included)
Compatible charger
(not included)
Lithium-ion
RB18L13
RB18L15
RB18L20
RB18L25
RB18L40
RB18L50
BCL14181H
BCL14183H
RC18150
RC18627
RC18120
RC18118C
RC18115
VIBRATION LEVEL
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of
exposure. The declared vibration emission level represents the main applications of the tool. However if the tool is used
for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may
signicantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may signicantly reduce the exposure level over the total working
period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm and organisation of work patterns.
PRODUCT SPECIFICATIONS
18V Brushless percussion drill
Model R18PD5
Voltage 18 V
Chuck 2 - 13 mm
Switch Variable speed
No load speed (drill mode):
- Lo speed 400 rpm
- Hi speed 1400 rpm
No load speed (Percussion drill mode):
- Lo speed 6800 IPM
- Hi speed 23800 IPM
Maximum torque 50 Nm
Maximum drilling capacity in wood 32 mm
Maximum drilling capacity in metal 13 mm
Maximum drilling capacity in masonry 13 mm
Weight
(According to EPTA procedure 01/2003)
1.5 kg
Weight - not incl. battery pack 1.1 kg
Measured sound values determined according to EN 60745:
A-weighted sound pressure level
Uncertainty K
L
pA
= 83.5 dB(A)
3 dB
A-weighted sound power level
Uncertainty K
L
wA
= 94.5 dB(A)
3 dB
Wear ear protectors.
The vibration total values (triax vector sum) determined according
to EN 60745:
Impact drilling into concrete
a
h,ID
= 13.9 m/s
2
Uncertainty K
1.5 m/s
2
Drilling into metal
a
h
, D
= <2.5 m/s
2
Uncertainty K
1.5 m/s
2
Screwdriving without impact
a
h
= <2.5 m/s
2
Uncertainty K
1.5 m/s
2