10
3-5x
1
2
2 3
7 8
1
Wear Personal Protective Equipment
(PPE). Wear full eye protection, ear
protection, non-slip heavy-duty gloves,
substantial footwear, and protective
clothing at all times while operating the
product. Do not operate the product
when barefoot or wearing open sandals.
Remove the guide bar cover. Add 3-5 drops of chain and bar oil to
the saw chain. Never work without
chain and bar oil. If the saw chain is
running without lubricant, the guide bar
and the saw chain can be damaged.
Install the battery pack. Make sure that
the latch of the battery pack clicks in
place and that the battery pack is fully
seated and securely attached before
beginning operation.
Press the trigger release and squeeze
the switch trigger.
NOTE:
To stop the product, release the
switch trigger.
To Next Page
Loading...
