5
■ When transporting the product in a vehicle, secure it
against movement or falling to prevent injury to persons
or damage to the product.
TRANSPORTING LITHIUM BATTERIES
Transport the battery pack in accordance with local and
national provisions and regulations.
Follow all special requirements on packaging and labelling
when transporting batteries by a third party. Ensure that
no batteries can come in contact with other batteries
or conductive materials while in transport by protecting
exposed connectors with insulating, non-conductive caps or
tape. Do not transport batteries that are cracked or leaking.
Check with the forwarding company for further advice.
MAINTENANCE
■ Use only original manufacturer’s replacement parts,
accessories, and attachments. Failure to do so can cause
possible injury, can contribute to poor performance, and
may void your warranty.
■ Power off the product, and remove the battery pack.
Allow both to cool down. Make sure that all moving parts
have come to a complete stop before any cleaning or
maintenance task.
■ You may make adjustments and repairs that are
described in this manual. For other repairs, contact
customer service.
■ For the replacement line, use only a nylon filament line
of the diameter described in the specifications table of
this manual.
■ After each use, clean the plastic parts with a soft, dry
cloth. For any sign of damage, contact customer service.
■ Check all nuts, bolts, and screws before each use and
at frequent intervals for proper tightness to ensure that
the product is in safe working condition. For any sign of
damage, contact customer service.
■ Contact customer service to replace damaged or
unreadable labels.
SYMBOLS ON THE PRODUCT
Safety alert
Read and understand all instructions
before operating the product. Follow all
warnings and safety instructions.
Do not expose the product to rain or damp
conditions.
Wear eye, ear, and head protection.
Wear appropriate respiratory mask.
Wear non-slip, heavy-duty gloves.
Wear non-slip safety footwear when using
the product.
Do not use metal blade(s) on the product.
Remove the battery pack before starting
any work on the product.
15m
Beware of thrown or ying objects. Keep
all bystanders a safe distance away from
the product.
Keep hands away from cut-o blade.
Beware of thrown or ying objects.
Keep all bystanders, especially children
and pets, at least 15 m away from the
operating area.
Guaranteed sound power level
Regulatory Compliance Mark (RCM).
Product meets applicable regulatory
requirements.
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with
your local authority or retailer for recycling
advice.
SYMBOLS IN THIS MANUAL
Note
Warning
Parts or accessories sold separately
To Next Page
Loading...
