20
English (original instructions)
EN
FR DE ES IT PT NL SV DA NO FI HU CS RU RO PL SL HR ET LT LV SK BG
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL NAME EXPLANATION
V
Volts Voltage
A
Amperes Current
Hz
Hertz Frequency (cycles per second)
W
Watt Power
min
Minutes Time
~
Alternating Current Type of current
Direct Current Type or a characteristic of current
n
o
No Load Speed Rotational speed, at no load
Class II Tool Double-insulated construction
.../min
Per Minute Revolutions, strokes, surface speed, orbits etc., per minute
Wet Conditions Alert Do not expose to rain or use in damp locations.
Safety Alert Precautions that involve your safety.
Read the Operator’s Manual To reduce the risk of injury, user must read and understand
Wear Eye and Hearing Protection
Wear eye protection which is marked to comply with EN 166 as well as
hearing protection when operating this equipment.
Keep Bystanders Away
Keep all bystanders, especially children and pets, at least 15m from the
operating area.
Ricochet
Thrown objects can ricochet and result in personal injury or property
damage.
Tri-Arc blade
Tri-Arc blade is appropriate for this unit and is suited for cutting pulpy
weeds and vines.
Do not use toothed blade This unit is not intended for use with a toothed saw type blade.
Petrol and Lubricant
Use unleaded gasoline intended for motor vehicle use with an octane
rating of 91 [(R + M) / 2] or higher. This product is powered by a 2-cycle
engine and requires pre-mixing gasoline and 2-cycle lubricant.
Boots Wear non-slip safety footwear when using this equipment.
Gloves Wear non-slip, heavy-duty gloves.
Switch
On/Off Switch
I = ON to Run
O = OFF to Stop
Conforms to all regulatory standards in the country in the EU
where the product is purchased.
960733006-01.indd 20 15/12/2010 7:40 PM
To Next Page
Loading...
