Ryobi RBC52FSBHO - Page 31

29
MAINTENANCE
1
2
3.0m
3.0m
1
2
200mm
3
5
6
5. Insert one end of the string into the eyelet
located on the side of the head and push
until string comes out through eyelet on the
other side. Continue to push line through
the head until the middle section of the line
is inside the head and line outside the head
is evenly divided on each side.
6. Rotate the knob on the head clockwise
to wind the line. Wind the line until
DSSUR[LPDWHO\PPUHPDLQVSURWUXGLQJ
from the head.