Ryobi RBC52FSBHO - Residual Risks and Reduction; Maintenance and Components; Whats in the Box; Product Symbols Explained

3
Ŷ Store the product in a cool, dry, and well-ventilated
place that is inaccessible to children.
Ŷ Keep away from corrosive agents such as garden
chemicals and de-icing salts.
Ŷ Do not store outdoors.
MAINTENANCE
WARNING
Use only original manufacturer’s replacement parts,
accessories, and attachments. Failure to do so can
cause possible injury, contribute to poor performance,
and may void your warranty.
WARNING
The cutting attachment must not rotate in idle mode. If
this requirement is not satisfied, the clutch has to be
adjusted or the product needs urgent maintenance by a
qualified technician.
WARNING
Note that the blade nut is a Nylon locking nut, which is
to be used for one time assembly only. Do not reuse
the Nylon locking nut. When installing/reinstalling, use
a new Nylon locking nut. Failure to follow this procedure
can result in serious injury. When installing/reinstalling
blades, use a new Nylon locking nut.
Ŷ You may make adjustments and repairs described
in this manual. For other repairs, have the product
serviced by an authorised service centre.
Ŷ Consequences of improper maintenance may include
excess carbon deposits resulting in loss of performance
and discharge of black lubricant residue dripping from
the muffler.
Ŷ Make sure all guards, straps, deflectors, and handles
are properly and securely attached to avoid the risk of
personal injury.
RESIDUAL RISKS
Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise in use, and the
operator should pay special attention to avoid the following:
Ŷ injury caused by contact with cutting means
– Ensure that the blade protectors are fitted when the
product is not in use. Keep hands and feet away
from the blades at all times.
Ŷ injury caused by vibration
– Hold the product by designated handles and restrict
working time and exposure.
Ŷ injury caused by exposure to noise
– Wear hearing protection and limit exposure.
Ŷ injury caused by flying debris
– Wear eye protection at all times.
Ŷ injury caused by falling objects
– Wear head protection if there is any risk of falling
objects.
Kickback can occur when using the brushcutter. Ensure
proper control by using both hands on the designated
handles. Read and follow the directions elsewhere in this
manual to help reduce the risk of kickback.
RISK REDUCTION
It has been reported that vibrations from handheld tools
may contribute to a condition called Raynaud’s Syndrome.
Symptoms may include tingling, numbness, and blanching
RI WKH ¿QJHUV XVXDOO\ DSSDUHQW XSRQ H[SRVXUH WR FROG
Hereditary factors, exposure to cold and dampness, diet,
smoking and work practices are all thought to contribute to
the development of these symptoms. There are measures
that can be taken by the operator to possibly reduce the
effects of vibration:
Ŷ Keep your body warm in cold weather. When operating
the product, wear gloves to keep the hands and wrists
warm. It is reported that cold weather is a major factor
contributing to Raynaud’s Syndrome.
Ŷ After each period of operation, exercise to increase
blood circulation.
Ŷ Ensure that the product is correctly located in a
designated working position before starting the product.
Ŷ Limit the amount of exposure per day. Take frequent
work breaks.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your physician.
WARNING
Injuries may be caused, or aggravated, by prolonged
use of a tool. When using any tool for prolonged periods,
ensure you take regular breaks.
WHAT’S IN THE BOX
Ŷ 8SSHUVKDIWSRZHUKHDG
Ŷ Straight shaft attachment
Ŷ REEL EASY grass trimmer head
Ŷ PRO CUT II grass trimmer head
Ŷ Cutting attachment guard
Ŷ Blade
Ŷ Harness
Ŷ Operator’s manual
Ŷ (QJLQHRLOP/
Ŷ Combination wrench
Ŷ Wrench X 1 pc.
Ŷ Allen wrenches X 2 pcs.
Ŷ &XWWLQJOLQHPP[SFV
SYMBOLS ON THE PRODUCT
Safety alert