Ryobi RBC52FSBHO - Page 33

31
MAINTENANCE
1
2
1
2
3
INSTALLING THE LINE IN THE PRO CUT
II HEAD
NOTE: 8VH D PRQR¿ODPHQW OLQH GLDPHWHU 
mm.
1. Turn off the product.
2. Gather two of the pre-cut lengths of trimmer
line provided or cut two pieces of trimmer line
LQFPOHQJWKV,QVHUWWKHOLQHLQWRWKHORDG
slots located on the sides of the line head.
Line should be pushed until approximately 2
cm protrudes from the holes on the top of the
line head.
3. Once the line protrudes 2 cm from the holes
on the top of the line head, gently pull back
slightly to ensure the line is gripped properly.