3
the ground. This is particularly important
during starting the product. Never start the
product if anyone is in front of the blade.
■ Do not operate the product when there is a
risk of lightning.
■ Do not expose the product to rain or wet
conditions. Water entering an appliance
will increase the risk of electric shock.
■ Keep bystanders, children, and pets 15 m
away from the area of operation. Stop the
product if anyone enters the area.
■ Never operate the product with damaged
guards or without guards in place.
■ Beware of objects thrown by the cutting
means. Clear debris like small stones,
gravel and other foreign objects from the
work area before starting operation. Wires
or string may become entangled with the
cutting means.
■ To reduce the risk of injury associated with
moving parts, always stop the product,
and disconnect from the power supply (if
applicable). Make sure all moving parts
have come to a complete stop:
● before servicing
● before leaving the product unattended
● before clearing a blockage
● before checking, cleaning, and working
on the product
● before working on the blade
● before checking for any damage if the
product starts to vibrate abnormally
● whenever performing maintenance
● whenever the product starts to vibrate
abnormally
■ Always ensure that ventilation openings
are kept clear of debris.
■ Make sure the cutting head attachment is
properly installed and securely fastened.
■ Make sure all guards, deflectors, and
handles are properly and securely
attached.
■ Do not modify the product in any way, this
may increase the risk of injury to yourself
or others.
■ Use only the manufacturer’s replacement
cutting line. Do not use any other cutting
attachment.
WARNING
Inspection after dropping or other impacts:
Thoroughly inspect the product and identify
any problems or damage to it. Any part that
is damaged should be properly repaired or
replaced by authorized service centre.
TRANSPORTATION AND STORAGE
■ Stop the product and allow it to cool down
before storing or transporting. Always
disconnect from the power supply and wind
the cable to prevent damage.
■ Clean all foreign materials from the product.
Store it in a cool, dry and well-ventilated
place that is inaccessible to children.
Keep away from corrosive agents, such as
garden chemicals and de-icing salts. Do
not store outdoors.
■ For transportation in vehicles, secure the
product against movement or falling to
prevent injury to persons or damage to the
product.
MAINTENANCE
WARNING
Use only original manufacturer’s
replacement parts, accessories, and
attachments. Failure to do so can
cause possible injury, contribute to poor
performance, and may void your warranty.
WARNING
Servicing requires extreme care and
knowledge and should be performed only
by a qualied service technician. Have the
product serviced by an authorised service
centre only. When servicing, use only
original replacement parts.
■ Turn off the product and disconnect
from the mains before conducting any
maintenance or cleaning work.
■ You may make adjustments and repairs
described in this manual. For other repairs,
To Next Page
Loading...
