Ryobi RLM36B46S1 - Replacing the Blade

18
OPERATION
REPLACING THE BLADE
1. Open the battery door. Remove the
isolator key and battery pack from the
mower. Close the battery door.
2. Tilt the mower on its side so that the
blade is vertical.
3. Clean away debris before changing the
blade.
4. Use a wood chock to stop the blade
from spinning during loosening and
tightening. Loosen the nut using a 17
mm spanner.
1
2
4
3
2
1
1
2
4
3