9
English
GB
F D E I P NL S DK N FIN GR HU CZ RU RO PL SLO HR TR EST LT LV SK BG
9
SYMBOLS
Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and safer.
NAME EXPLANATION
Safety Alert Symbol Indicates danger, warning or caution. It means attention!!! Your safety is
involved.
Read Your Operator's Your manual contains special messages to bring attention to potential
Manual safety concerns as well as operating and servicing information. Please
read all the information carefully to ensure satisfaction and safe use.
Wear eye, hearing Wear eye, hearing and head protection when operating this equipment.
Keep bystanders away Keep all bystanders at least 15 m away.
Ricochet Danger of Ricochet.
No blade Do not install any type of blade on this unit.
RPM Decal Rotational direction and maximum speed of the shaft for the cutting
attachment.
Boots Wear non-slip safety footwear when using this equipment.
Gloves Wear non-slip, heavy-duty gloves.
No Smoking Do not smoke when mixing fuel or filling fuel tank.
Petrol Use unleaded gasoline intended for motor vehicle use with an octane
rating of 87 ([R+M]/2) or higher.
Lubricant Use synthetic 2-stroke lubricant for air cooled engines.
Mix Petrol and Lubricant Mix the fuel mix thoroughly and also each time before refuelling.
and head protection
RLT30CD/CES 25lgs_manual.indd 9RLT30CD/CES 25lgs_manual.indd 9 11/2/03 11:40:22 AM11/2/03 11:40:22 AM
To Next Page
Loading...
Need help?
General
