8
1
6
2
Always wear safety goggles or safety glasses with side shields
when operating the product. Wear non-slip, heavy-duty protective
gloves. Wear non-skid, protective footwear that will protect your
feet and improve your footing on slippery surfaces.
Install the small guard to the main guard. Secure the screws with
a philips head screwdriver.
Push the lock button, and slide out the hanger cap from the lower
shaft.
5
Insert the screw and tab into place to attach the front handle to the
upper shaft. Tighten the wing nut to secure.
To Next Page
Loading...
