PRODUCT SPECIFICATIONS
Cordless Line Trimmer
Model RLT36X20/RLT36BS
Rated voltage 36V d.c.
No-load speed
5,500/min; cut swath 330 mm
5,600/min; cut swath 280 mm
Cutting line diameter 2.0 mm
Cutting capacity 330 mm / 280 mm
Weight without battery pack 4.0 kg
Maximum weight with heaviest
pack and accessory
5.5 kg
Noise emission values determined according to IEC 60335-2-91
A-weighted sound pressure level
L
pA
= 83.1 dB
Uncertainty
K = 2.5 dB
A-weighted sound power level
L
WA
= 95.3
Uncertainty
K = 2.5 dB
Vibration total values determined according to IEC 60335-2-91
Vibration emission value
Front handle
a
h
= 0.9 m/s²
Rear handle
a
h
= 1.0 m/s²
Uncertainty
K = 1.5 m/s²
BATTERY AND CHARGER
Model RLT36X20 RLT36BS
Battery pack
BPL3620D -
Weight 0.85 kg -
Charger
BCL3617S -
Compatible battery
packs
BPL3615, BPL3626, BPL3640,
BPL3620D, BPL3626D, BPL3640D,
BPL3650D, BPL3626D2, BPL3650D2,
BPL3640D2
Compatible charger
BCL3617S, BCL3620, BCL3620S,
BCL3650F, BCL3617U, BCL3660F
REPLACEMENT PART
Complete spool RAC1214
Line replacement PWFTL2015T - PWFTL2050T
VIBRATION LEVEL
The declared vibration value has been measured with a
standard test method and may be used to compare one
tool with another.
The declared vibration value may be used in a preliminary
assessment of exposure.
The vibration emission during actual use of power tool can
differ from the declared total value depending on the ways
in which the tool is used.
Identify safety measures to protect yourself based on an
estimation of exposure in the actual conditions of use,
taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running
idle in addition to the trigger time.
To Next Page
Loading...
